UniCable support
•Added: Experimental UniCable support according to the EN50494 standard. (What is UniCable? English Deutsch).
Please note: UniCable will only work with TechnoTrend and FireDTV DVB-S/S2 devices. Other device drivers don't provide the means for UniCable support yet. In case of a TechnoTrend device the file ttBdaDrvApi_Dll.dll (optionally installed with DVBViewer Pro) must be present in the program directory.
UniCable support is activated by inserting two lines in the appropriate device section of the file hardware.xml, while the DVBViewer is closed.
The UniCable entries must look like this:
CODE
<entry name="Slot">N</entry>
<entry name="SlotFrequency">FFFF</entry>
where N is the slot number (0..7) and FFFF the slot frequency (intermediate frequency, IF) in MHz on which different transponders are routed to the receiver. Example:
CODE
<entry name="Slot">6</entry>
<entry name="SlotFrequency">1980</entry>
You may find these values on the antenna socket. Please note: On sockets or in manuals the slots may be numbered from 1 to 8. You will have to subtract 1 in this case.
Visitano il forum: Nessuno e 3 ospiti