Infinity Usb e abbo Srg
da krosta » mer dic 14, 2011 4:55 pm
giap2002 ha scritto:Scusa, come faccio a sapere se Infinity Usb Smart funziona?
http://www.scaistar.com/forum/v ... highlight=
TESTARE IL LETTORE PER LA LETTURA DI CARD
powered by:TOSHIBA SATELLITE PRO C850-19N (provvisorio) + TT Connect S2-3650CI + DVBViewer PRO + 13°E + Invacom TWH 031 + 3xOMNIKEY 3121 USB + Philips 42PFL6007H/12 + YHT-294 + JBL SCS 178 + JBL ES150P
-
krosta - Aspirante Moderatore
- Messaggi: 742
- Iscritto il: mer nov 09, 2005 8:20 pm
- Località: Santa Cruz
da giap2002 » mer dic 14, 2011 6:04 pm
Al 99,9% avete ragione voi. Anzi a questo punto è sicuro. Ho guardato la porta di comunicazione - da pannello di controllo - sistema etc - che precedentemente aveva una com3 creata e che ora non esiste più. Ecco la ragione del non funzionamento. Proverò a risistemare l'Infinity Usb smart e mi farò risentire. Ma perché è andata via. Mistero! Una sola cosa vi chiedo: non mi abbandonate, non diamola vinta alla Svizzera:
Ciao
Ciao
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da giap2002 » mer dic 14, 2011 8:44 pm
Ho regolarmente installato infinity. Che sia stata installata correttamente lo dicono i test finali ed in particolare lo status connected e card inserted. A ciò si aggiunge il fatto che c'é ora la port com3. Dal primo lancio sul log di oscam, però, ricompare "can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded" Che fare?
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da giap2002 » mer dic 14, 2011 8:51 pm
Non so se tivusat la legge:
>> OSCam << cardserver started at Wed Dec 14 21:46:16 2011
-------------------------------------------------------------------------------
2011/12/14 21:46:16 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/14 21:46:16 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/14 21:46:16 7A8238 s client max. idle=120 sec, debug level=0
2011/12/14 21:46:16 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/14 21:46:16 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/14 21:46:16 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/14 21:46:16 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/14 21:46:16 7A8238 s signal handling initialized (type=sysv)
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/14 21:46:16 7A8238 s monitor: disabled
2011/12/14 21:46:16 7A8238 s camd33: disabled
2011/12/14 21:46:16 7A8238 s camd35: disabled
2011/12/14 21:46:16 7A8238 s cs378x: disabled
2011/12/14 21:46:16 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/14 21:46:16 7A8238 s CAID: 0500
2011/12/14 21:46:16 7A8238 s provid #0: 000000
2011/12/14 21:46:16 7A8238 s radegast: disabled
2011/12/14 21:46:16 7A8238 s http disabled
2011/12/14 21:46:16 7A8238 s creating thread for device /dev/ttyS2
2011/12/14 21:46:16 7E8498 r reader thread started (thread= 7E8498, label=tivu, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/14 21:46:16 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/14 21:46:16 7A8238 s waiting for local card init
2011/12/14 21:46:20 7E8498 r tivu card detected
2011/12/14 21:46:24 7E8498 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/14 21:46:26 7E8498 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/14 21:46:27 7E8498 r detect nagra tiger card
2011/12/14 21:46:31 7E8498 r type: NAGRA, caid: 183D, IRD ID: FF 36 F0 6E
2011/12/14 21:46:31 7E8498 r ProviderID: 00 00 54 11
2011/12/14 21:46:33 7E8498 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2011/12/14 21:46:33 7E8498 r found cardsystem nagra
2011/12/14 21:46:33 7E8498 r ROM: T I G E R 0 0 3
2011/12/14 21:46:33 7E8498 r REV: R e v 2 5 0
2011/12/14 21:46:33 7E8498 r SER: *********
2011/12/14 21:46:33 7E8498 r CAID: 183D
2011/12/14 21:46:33 7E8498 r Prv.ID: 00 00 54 11 (sysid)
2011/12/14 21:46:33 7E8498 r Activation Date : 01/01/2009
2011/12/14 21:46:33 7E8498 r Expiry Date : 31/12/2099
2011/12/14 21:46:33 7E8498 r [nagra-reader] ready for requests
2011/12/14 21:46:34 7A8238 s init for all local cards done
2011/12/14 21:46:34 7A8238 s anti cascading disabled
2011/12/14 21:46:34 7F65A8 c client connected to 34000 port
2011/12/14 21:46:35 7F65A8 c encrypted newcamd:34000-client 127.0.0.1 granted (user, au=on (1 reader))
2011/12/14 21:46:35 7F65A8 c user user authenticated successfully (ACamd)
2011/12/14 21:46:35 7F65A8 c AU disabled for user user
2011/12/14 21:46:35 7F65A8 c user (0500&023800/36B3/2A:7385): rejected user ident (0 ms) (of 0 avail 0) (no card support 0500:023800)
2011/12/14 21:47:23 7F65A8 c Connection closed to client
2011/12/14 21:47:23 7F65A8 c user disconnected from 127.0.0.1
2011/12/14 21:47:23 7F65A8 c thread 7F65A8 ended!
>> OSCam << cardserver started at Wed Dec 14 21:46:16 2011
-------------------------------------------------------------------------------
2011/12/14 21:46:16 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/14 21:46:16 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/14 21:46:16 7A8238 s client max. idle=120 sec, debug level=0
2011/12/14 21:46:16 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/14 21:46:16 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/14 21:46:16 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/14 21:46:16 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/14 21:46:16 7A8238 s signal handling initialized (type=sysv)
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/14 21:46:16 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/14 21:46:16 7A8238 s monitor: disabled
2011/12/14 21:46:16 7A8238 s camd33: disabled
2011/12/14 21:46:16 7A8238 s camd35: disabled
2011/12/14 21:46:16 7A8238 s cs378x: disabled
2011/12/14 21:46:16 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/14 21:46:16 7A8238 s CAID: 0500
2011/12/14 21:46:16 7A8238 s provid #0: 000000
2011/12/14 21:46:16 7A8238 s radegast: disabled
2011/12/14 21:46:16 7A8238 s http disabled
2011/12/14 21:46:16 7A8238 s creating thread for device /dev/ttyS2
2011/12/14 21:46:16 7E8498 r reader thread started (thread= 7E8498, label=tivu, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/14 21:46:16 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/14 21:46:16 7A8238 s waiting for local card init
2011/12/14 21:46:20 7E8498 r tivu card detected
2011/12/14 21:46:24 7E8498 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/14 21:46:26 7E8498 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/14 21:46:27 7E8498 r detect nagra tiger card
2011/12/14 21:46:31 7E8498 r type: NAGRA, caid: 183D, IRD ID: FF 36 F0 6E
2011/12/14 21:46:31 7E8498 r ProviderID: 00 00 54 11
2011/12/14 21:46:33 7E8498 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2011/12/14 21:46:33 7E8498 r found cardsystem nagra
2011/12/14 21:46:33 7E8498 r ROM: T I G E R 0 0 3
2011/12/14 21:46:33 7E8498 r REV: R e v 2 5 0
2011/12/14 21:46:33 7E8498 r SER: *********
2011/12/14 21:46:33 7E8498 r CAID: 183D
2011/12/14 21:46:33 7E8498 r Prv.ID: 00 00 54 11 (sysid)
2011/12/14 21:46:33 7E8498 r Activation Date : 01/01/2009
2011/12/14 21:46:33 7E8498 r Expiry Date : 31/12/2099
2011/12/14 21:46:33 7E8498 r [nagra-reader] ready for requests
2011/12/14 21:46:34 7A8238 s init for all local cards done
2011/12/14 21:46:34 7A8238 s anti cascading disabled
2011/12/14 21:46:34 7F65A8 c client connected to 34000 port
2011/12/14 21:46:35 7F65A8 c encrypted newcamd:34000-client 127.0.0.1 granted (user, au=on (1 reader))
2011/12/14 21:46:35 7F65A8 c user user authenticated successfully (ACamd)
2011/12/14 21:46:35 7F65A8 c AU disabled for user user
2011/12/14 21:46:35 7F65A8 c user (0500&023800/36B3/2A:7385): rejected user ident (0 ms) (of 0 avail 0) (no card support 0500:023800)
2011/12/14 21:47:23 7F65A8 c Connection closed to client
2011/12/14 21:47:23 7F65A8 c user disconnected from 127.0.0.1
2011/12/14 21:47:23 7F65A8 c thread 7F65A8 ended!
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da krosta » mer dic 14, 2011 9:48 pm
Chiaramente non puoi pretendere di vedere un canale srg con la smartcard di tivusat inserita....ti ricordo che devi chiudere oscam, mettere enable=0 nel reader tivusat e enable=1 nel reader srg e riavviare oscam (e viceversa per la srg)
Ad ogni modo ora l'infinity pare proprio funzionare
Ad ogni modo ora l'infinity pare proprio funzionare
powered by:TOSHIBA SATELLITE PRO C850-19N (provvisorio) + TT Connect S2-3650CI + DVBViewer PRO + 13°E + Invacom TWH 031 + 3xOMNIKEY 3121 USB + Philips 42PFL6007H/12 + YHT-294 + JBL SCS 178 + JBL ES150P
-
krosta - Aspirante Moderatore
- Messaggi: 742
- Iscritto il: mer nov 09, 2005 8:20 pm
- Località: Santa Cruz
da giap2002 » gio dic 15, 2011 9:05 am
Mi dite per favore cosa non va ora? Infinity funziona?
>> OSCam << cardserver started at Thu Dec 15 09:58:25 2011
-------------------------------------------------------------------------------
2011/12/15 9:58:25 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/15 9:58:25 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/15 9:58:25 7A8238 s client max. idle=120 sec, debug level=0
2011/12/15 9:58:25 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/15 9:58:25 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/15 9:58:25 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/15 9:58:25 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/15 9:58:25 7A8238 s signal handling initialized (type=sysv)
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/15 9:58:25 7A8238 s monitor: disabled
2011/12/15 9:58:25 7A8238 s camd33: disabled
2011/12/15 9:58:25 7A8238 s camd35: disabled
2011/12/15 9:58:25 7A8238 s cs378x: disabled
2011/12/15 9:58:25 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/15 9:58:25 7A8238 s CAID: 0500
2011/12/15 9:58:25 7A8238 s provid #0: 000000
2011/12/15 9:58:25 7A8238 s radegast: disabled
2011/12/15 9:58:25 7A8238 s http disabled
2011/12/15 9:58:25 7A8238 s creating thread for device dev/ttyS2
2011/12/15 9:58:25 7E84A8 r reader thread started (thread= 7E84A8, label=svizzera, device=dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/15 9:58:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 9:58:25 7E84A8 r Cannot open device: dev/ttyS2
2011/12/15 9:58:25 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/15 9:58:25 7A8238 s waiting for local card init
2011/12/15 9:59:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 9:59:25 7E84A8 r Cannot open device: dev/ttyS2
2011/12/15 10:00:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 10:00:25 7E84A8 r Cannot open device: dev/ttyS2
09:58:31.843: ACamd v0.6.1.8
09:58:31.906: MD-API Version 03.00 - 1.06
09:58:31.906: systems: registering CA system Cardclient, pri -15, ident 1000
09:58:31.906: structloaders: registering loader cardclient config
09:58:31.906: cardclients: registering cardclient Newcamd
09:58:31.906: cardclients: registering cardclient Newcamd2
09:58:31.906: cardclients: registering cardclient CCcamN
09:58:31.906: cardclients: registering cardclient Radegast
09:58:31.906: cardclients: registering cardclient Camd35
09:58:31.906: cardclients: registering cardclient EmuBox03
09:58:31.906: cardclients: registering cardclient Gbox
09:58:31.906: cardclients: registering cardclient GboxN
09:58:31.906: cardclients: registering cardclient MboxN
09:58:31.906: structloaders: registering loader smartcard data
09:58:31.906: systems: registering CA system SC-Irdeto, pri -10, ident 1001
09:58:31.906: feature: using feature SMARTCARD
09:58:31.906: registering Irdeto smartcard (id 49726474)
09:58:31.906: systems: registering CA system SC-Seca, pri -10, ident 1002
09:58:31.906: registering Seca smartcard (id 53656361)
09:58:31.906: systems: registering CA system SC-Viaccess, pri -10, ident 1003
09:58:31.906: registering Viaccess smartcard (id 56696173)
09:58:31.906: systems: registering CA system SC-Conax, pri -10, ident 1004
09:58:31.906: registering Conax smartcard (id 436f6e78)
09:58:31.906: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
09:58:31.906: registering Cryptoworks smartcard (id 4372576f)
09:58:31.906: systems: registering CA system SC-Nagra, pri -10, ident 1006
09:58:31.906: registering Nagra smartcard (id 4e616772)
09:58:31.906: systems: registering CA system SC-NDS, pri -10, ident 1007
09:58:31.906: registering NDS smartcard (id 56694732)
09:58:31.968: Monitor listen on port 1367
09:58:32.031: Engine [MD-API]
09:58:32.031: failed open C:\dvbdream11 dicembre 2011\Plugins\pip00\smartcard.conf: No such file or directory
09:58:32.031: loading cardclient config from C:\dvbdream11 dicembre 2011\Plugins\pip00\cardclient.conf
09:58:32.031: now using protocol version 525 (cdLen=8)
09:58:32.031: hostname=127.0.0.1 port=34000 emm=1 emmCaids 0500/ffff
09:58:32.031: Add Provider 00023800
09:58:32.031: Add Provider 00FFF430
09:58:32.031: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
09:58:32.031: client 'Newcamd' ready
09:58:32.031: now using protocol version 525 (cdLen=8)
09:58:32.031: hostname=127.0.0.1 port=34001 emm=1 emmCaids 183d/ffff
09:58:32.031: Add Provider 00023800
09:58:32.031: Add Provider 00FFF430
09:58:32.031: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
09:58:32.031: client 'Newcamd' ready
09:58:32.031: ** registered systems:
09:58:32.031: ** SC-NDS (pri -10)
09:58:32.031: ** SC-Nagra (pri -10)
09:58:32.031: ** SC-Cryptoworks (pri -10)
09:58:32.031: ** SC-Conax (pri -10)
09:58:32.031: ** SC-Viaccess (pri -10)
09:58:32.031: ** SC-Seca (pri -10)
09:58:32.031: ** SC-Irdeto (pri -10)
09:58:32.031: ** Cardclient (pri -15)
09:58:32.031: no smartcard interface defined!
09:58:32.031:
09:58:32.031: Ch: 1003 - TV 4
09:58:32.031: Programm crc: 4F6BCB83
09:58:36.640:
09:58:36.640: Ch: 402 - RSI LA 1
09:58:36.640: Programm crc: 12E065D6
09:58:36.640: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:36.656:
09:58:36.656: Ch: 402 - RSI LA 1
09:58:36.656: Programm crc: 12E065D6
09:58:36.656: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:36.656: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:36.765: Incomming PackageSize [184]
09:58:36.765: Login attemp (1)
09:58:36.765: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:58:46.984:
09:58:46.984: Ch: 402 - RSI LA 1
09:58:46.984: Programm crc: 12E065D6
09:58:46.984: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:56.765: socket: select timed out (20000 ms)
09:58:56.765: no connect answer from 127.0.0.1:34000
09:58:56.765: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:56.828:
09:58:56.828: Ch: 402 - RSI LA 1
09:58:56.828: Programm crc: 12E065D6
09:58:56.828: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:56.828: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:56.906: Login attemp (1)
09:58:56.906: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:59:00.968:
09:59:00.968: Ch: 406 - RSI LA 2
09:59:00.968: Programm crc: 2D8CD633
09:59:00.968: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:16.906: socket: select timed out (20000 ms)
09:59:16.906: no connect answer from 127.0.0.1:34000
09:59:16.906: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:16.968: Login attemp (1)
09:59:16.968: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:59:17.906:
09:59:17.906: Ch: 406 - RSI LA 2
09:59:17.906: Programm crc: 2D8CD633
09:59:17.906: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:36.968: socket: select timed out (20000 ms)
09:59:36.968: no connect answer from 127.0.0.1:34000
09:59:36.968: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:37.093:
09:59:37.093: Ch: 406 - RSI LA 2
09:59:37.093: Programm crc: 2D8CD633
09:59:37.093: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:37.093: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:37.093: Login attemp (1)
09:59:37.093: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
>> OSCam << cardserver started at Thu Dec 15 09:58:25 2011
-------------------------------------------------------------------------------
2011/12/15 9:58:25 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/15 9:58:25 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/15 9:58:25 7A8238 s client max. idle=120 sec, debug level=0
2011/12/15 9:58:25 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/15 9:58:25 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/15 9:58:25 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/15 9:58:25 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/15 9:58:25 7A8238 s signal handling initialized (type=sysv)
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/15 9:58:25 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/15 9:58:25 7A8238 s monitor: disabled
2011/12/15 9:58:25 7A8238 s camd33: disabled
2011/12/15 9:58:25 7A8238 s camd35: disabled
2011/12/15 9:58:25 7A8238 s cs378x: disabled
2011/12/15 9:58:25 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/15 9:58:25 7A8238 s CAID: 0500
2011/12/15 9:58:25 7A8238 s provid #0: 000000
2011/12/15 9:58:25 7A8238 s radegast: disabled
2011/12/15 9:58:25 7A8238 s http disabled
2011/12/15 9:58:25 7A8238 s creating thread for device dev/ttyS2
2011/12/15 9:58:25 7E84A8 r reader thread started (thread= 7E84A8, label=svizzera, device=dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/15 9:58:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 9:58:25 7E84A8 r Cannot open device: dev/ttyS2
2011/12/15 9:58:25 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/15 9:58:25 7A8238 s waiting for local card init
2011/12/15 9:59:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 9:59:25 7E84A8 r Cannot open device: dev/ttyS2
2011/12/15 10:00:25 7E84A8 r ERROR opening device dev/ttyS2
2011/12/15 10:00:25 7E84A8 r Cannot open device: dev/ttyS2
09:58:31.843: ACamd v0.6.1.8
09:58:31.906: MD-API Version 03.00 - 1.06
09:58:31.906: systems: registering CA system Cardclient, pri -15, ident 1000
09:58:31.906: structloaders: registering loader cardclient config
09:58:31.906: cardclients: registering cardclient Newcamd
09:58:31.906: cardclients: registering cardclient Newcamd2
09:58:31.906: cardclients: registering cardclient CCcamN
09:58:31.906: cardclients: registering cardclient Radegast
09:58:31.906: cardclients: registering cardclient Camd35
09:58:31.906: cardclients: registering cardclient EmuBox03
09:58:31.906: cardclients: registering cardclient Gbox
09:58:31.906: cardclients: registering cardclient GboxN
09:58:31.906: cardclients: registering cardclient MboxN
09:58:31.906: structloaders: registering loader smartcard data
09:58:31.906: systems: registering CA system SC-Irdeto, pri -10, ident 1001
09:58:31.906: feature: using feature SMARTCARD
09:58:31.906: registering Irdeto smartcard (id 49726474)
09:58:31.906: systems: registering CA system SC-Seca, pri -10, ident 1002
09:58:31.906: registering Seca smartcard (id 53656361)
09:58:31.906: systems: registering CA system SC-Viaccess, pri -10, ident 1003
09:58:31.906: registering Viaccess smartcard (id 56696173)
09:58:31.906: systems: registering CA system SC-Conax, pri -10, ident 1004
09:58:31.906: registering Conax smartcard (id 436f6e78)
09:58:31.906: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
09:58:31.906: registering Cryptoworks smartcard (id 4372576f)
09:58:31.906: systems: registering CA system SC-Nagra, pri -10, ident 1006
09:58:31.906: registering Nagra smartcard (id 4e616772)
09:58:31.906: systems: registering CA system SC-NDS, pri -10, ident 1007
09:58:31.906: registering NDS smartcard (id 56694732)
09:58:31.968: Monitor listen on port 1367
09:58:32.031: Engine [MD-API]
09:58:32.031: failed open C:\dvbdream11 dicembre 2011\Plugins\pip00\smartcard.conf: No such file or directory
09:58:32.031: loading cardclient config from C:\dvbdream11 dicembre 2011\Plugins\pip00\cardclient.conf
09:58:32.031: now using protocol version 525 (cdLen=8)
09:58:32.031: hostname=127.0.0.1 port=34000 emm=1 emmCaids 0500/ffff
09:58:32.031: Add Provider 00023800
09:58:32.031: Add Provider 00FFF430
09:58:32.031: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
09:58:32.031: client 'Newcamd' ready
09:58:32.031: now using protocol version 525 (cdLen=8)
09:58:32.031: hostname=127.0.0.1 port=34001 emm=1 emmCaids 183d/ffff
09:58:32.031: Add Provider 00023800
09:58:32.031: Add Provider 00FFF430
09:58:32.031: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
09:58:32.031: client 'Newcamd' ready
09:58:32.031: ** registered systems:
09:58:32.031: ** SC-NDS (pri -10)
09:58:32.031: ** SC-Nagra (pri -10)
09:58:32.031: ** SC-Cryptoworks (pri -10)
09:58:32.031: ** SC-Conax (pri -10)
09:58:32.031: ** SC-Viaccess (pri -10)
09:58:32.031: ** SC-Seca (pri -10)
09:58:32.031: ** SC-Irdeto (pri -10)
09:58:32.031: ** Cardclient (pri -15)
09:58:32.031: no smartcard interface defined!
09:58:32.031:
09:58:32.031: Ch: 1003 - TV 4
09:58:32.031: Programm crc: 4F6BCB83
09:58:36.640:
09:58:36.640: Ch: 402 - RSI LA 1
09:58:36.640: Programm crc: 12E065D6
09:58:36.640: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:36.656:
09:58:36.656: Ch: 402 - RSI LA 1
09:58:36.656: Programm crc: 12E065D6
09:58:36.656: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:36.656: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:36.765: Incomming PackageSize [184]
09:58:36.765: Login attemp (1)
09:58:36.765: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:58:46.984:
09:58:46.984: Ch: 402 - RSI LA 1
09:58:46.984: Programm crc: 12E065D6
09:58:46.984: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:56.765: socket: select timed out (20000 ms)
09:58:56.765: no connect answer from 127.0.0.1:34000
09:58:56.765: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:56.828:
09:58:56.828: Ch: 402 - RSI LA 1
09:58:56.828: Programm crc: 12E065D6
09:58:56.828: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
09:58:56.828: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
09:58:56.906: Login attemp (1)
09:58:56.906: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:59:00.968:
09:59:00.968: Ch: 406 - RSI LA 2
09:59:00.968: Programm crc: 2D8CD633
09:59:00.968: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:16.906: socket: select timed out (20000 ms)
09:59:16.906: no connect answer from 127.0.0.1:34000
09:59:16.906: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:16.968: Login attemp (1)
09:59:16.968: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
09:59:17.906:
09:59:17.906: Ch: 406 - RSI LA 2
09:59:17.906: Programm crc: 2D8CD633
09:59:17.906: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:36.968: socket: select timed out (20000 ms)
09:59:36.968: no connect answer from 127.0.0.1:34000
09:59:36.968: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:37.093:
09:59:37.093: Ch: 406 - RSI LA 2
09:59:37.093: Programm crc: 2D8CD633
09:59:37.093: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
09:59:37.093: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
09:59:37.093: Login attemp (1)
09:59:37.093: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da giap2002 » gio dic 15, 2011 9:21 am
I rispettivi log, questa volta di Tivusat:
10:15:02.140: ACamd v0.6.1.8
10:15:02.171: MD-API Version 03.00 - 1.06
10:15:02.171: systems: registering CA system Cardclient, pri -15, ident 1000
10:15:02.171: structloaders: registering loader cardclient config
10:15:02.171: cardclients: registering cardclient Newcamd
10:15:02.171: cardclients: registering cardclient Newcamd2
10:15:02.171: cardclients: registering cardclient CCcamN
10:15:02.171: cardclients: registering cardclient Radegast
10:15:02.171: cardclients: registering cardclient Camd35
10:15:02.171: cardclients: registering cardclient EmuBox03
10:15:02.171: cardclients: registering cardclient Gbox
10:15:02.171: cardclients: registering cardclient GboxN
10:15:02.171: cardclients: registering cardclient MboxN
10:15:02.171: structloaders: registering loader smartcard data
10:15:02.171: systems: registering CA system SC-Irdeto, pri -10, ident 1001
10:15:02.171: feature: using feature SMARTCARD
10:15:02.171: registering Irdeto smartcard (id 49726474)
10:15:02.171: systems: registering CA system SC-Seca, pri -10, ident 1002
10:15:02.171: registering Seca smartcard (id 53656361)
10:15:02.171: systems: registering CA system SC-Viaccess, pri -10, ident 1003
10:15:02.171: registering Viaccess smartcard (id 56696173)
10:15:02.171: systems: registering CA system SC-Conax, pri -10, ident 1004
10:15:02.171: registering Conax smartcard (id 436f6e78)
10:15:02.171: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
10:15:02.171: registering Cryptoworks smartcard (id 4372576f)
10:15:02.171: systems: registering CA system SC-Nagra, pri -10, ident 1006
10:15:02.171: registering Nagra smartcard (id 4e616772)
10:15:02.171: systems: registering CA system SC-NDS, pri -10, ident 1007
10:15:02.171: registering NDS smartcard (id 56694732)
10:15:02.187: Monitor listen on port 1485
10:15:02.234: Engine [MD-API]
10:15:02.234: failed open C:\dvbdream11 dicembre 2011\Plugins\pip00\smartcard.conf: No such file or directory
10:15:02.234: loading cardclient config from C:\dvbdream11 dicembre 2011\Plugins\pip00\cardclient.conf
10:15:02.234: now using protocol version 525 (cdLen=8)
10:15:02.234: hostname=127.0.0.1 port=34000 emm=1 emmCaids 0500/ffff
10:15:02.234: Add Provider 00023800
10:15:02.234: Add Provider 00FFF430
10:15:02.234: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
10:15:02.234: client 'Newcamd' ready
10:15:02.234: now using protocol version 525 (cdLen=8)
10:15:02.234: hostname=127.0.0.1 port=34001 emm=1 emmCaids 183d/ffff
10:15:02.234: Add Provider 00023800
10:15:02.234: Add Provider 00FFF430
10:15:02.234: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
10:15:02.234: client 'Newcamd' ready
10:15:02.234: ** registered systems:
10:15:02.234: ** SC-NDS (pri -10)
10:15:02.234: ** SC-Nagra (pri -10)
10:15:02.234: ** SC-Cryptoworks (pri -10)
10:15:02.234: ** SC-Conax (pri -10)
10:15:02.234: ** SC-Viaccess (pri -10)
10:15:02.234: ** SC-Seca (pri -10)
10:15:02.234: ** SC-Irdeto (pri -10)
10:15:02.234: ** Cardclient (pri -15)
10:15:02.234: no smartcard interface defined!
10:15:02.234:
10:15:02.234: Ch: 1003 - TV 4
10:15:02.234: Programm crc: 4F6BCB83
10:15:05.859:
10:15:05.859: Ch: 33 - LA7
10:15:05.859: Programm crc: BE33FD8C
10:15:05.859: PMT: ACamd_PMT.txt, search, not found PMT=0021 (AND SID=0E1E)
10:15:05.859: 0x0021 0x0E1E 0x183D 0x00000000 0x00AA 0x0120 11111110
10:15:05.906:
10:15:05.906: Ch: 33 - LA7
10:15:05.906: Programm crc: BE33FD8C
10:15:05.906: PMT: ACamd_PMT.txt, search, not found PMT=0021 (AND SID=0E1E)
10:15:05.906: 0x0021 0x0E1E 0x183D 0x00000000 0x00AA 0x0120 11111110
10:15:05.968: Incomming PackageSize [184]
10:15:05.968: Login attemp (1)
10:15:05.968: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:06.968: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:14.156: Login attemp (1)
10:15:14.156: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:15.125: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:18.046:
10:15:18.046: Ch: 136 - Rai 4
10:15:18.046: Programm crc: 6F8A1CBB
10:15:18.046: PMT: ACamd_PMT.txt, search, not found PMT=0088 (AND SID=2142)
10:15:18.046: 0x0088 0x2142 0x183D 0x00000000 0x1046 0x0137 11111110
10:15:18.093: Login attemp (1)
10:15:18.093: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:19.046: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:25.328: Login attemp (1)
10:15:25.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:26.296: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:38.328: Login attemp (1)
10:15:38.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:39.359: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:40.765:
10:15:40.765: Ch: 900 - Rai Movie
10:15:40.765: Programm crc: 659577B8
10:15:40.781: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:40.781: PMT: chcache.ini, 0384,2136,183D,00000000,1042,0137,Rai Movie
10:15:40.781: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:40.828: Login attemp (1)
10:15:40.828: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:41.781: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:47.328: Login attemp (1)
10:15:47.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:48.218: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:52.515:
10:15:52.515: Ch: 900 - Rai Movie
10:15:52.515: Programm crc: 659577B8
10:15:52.515: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:52.515: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:52.593: Login attemp (1)
10:15:52.593: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:53.546: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:55.312:
10:15:55.312: Ch: 900 - Rai Movie
10:15:55.312: Programm crc: 659577B8
10:15:55.312: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:55.312: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:55.390: Login attemp (1)
10:15:55.390: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:56.359: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:57.328: Login attemp (1)
10:15:57.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:58.281: socket: connect failed: Winsock Error 10061: Connection refused.
10:16:07.328: Login attemp (1)
10:16:07.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:16:08.437: socket: connect failed: Winsock Error 10061: Connection refused.
10:16:17.328: Login attemp (1)
10:16:17.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:16:18.296: socket: connect failed: Winsock Error 10061: Connection refused.
>> OSCam << cardserver started at Thu Dec 15 10:14:55 2011
-------------------------------------------------------------------------------
2011/12/15 10:14:55 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/15 10:14:55 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/15 10:14:55 7A8238 s client max. idle=120 sec, debug level=0
2011/12/15 10:14:55 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/15 10:14:55 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/15 10:14:55 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/15 10:14:55 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/15 10:14:55 7A8238 s signal handling initialized (type=sysv)
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/15 10:14:55 7A8238 s monitor: disabled
2011/12/15 10:14:55 7A8238 s camd33: disabled
2011/12/15 10:14:55 7A8238 s camd35: disabled
2011/12/15 10:14:55 7A8238 s cs378x: disabled
2011/12/15 10:14:55 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/15 10:14:55 7A8238 s CAID: 0500
2011/12/15 10:14:55 7A8238 s provid #0: 000000
2011/12/15 10:14:55 7A8238 s radegast: disabled
2011/12/15 10:14:55 7A8238 s http disabled
2011/12/15 10:14:55 7A8238 s creating thread for device /dev/ttyS2
2011/12/15 10:14:55 7E84A8 r reader thread started (thread= 7E84A8, label=tivu, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/15 10:14:55 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/15 10:14:55 7A8238 s waiting for local card init
2011/12/15 10:14:58 7E84A8 r tivu card detected
2011/12/15 10:15:03 7E84A8 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/15 10:15:05 7E84A8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/15 10:15:06 7E84A8 r detect nagra tiger card
2011/12/15 10:15:10 7E84A8 r type: NAGRA, caid: 183D, IRD ID: FF 36 F0 6E
2011/12/15 10:15:10 7E84A8 r ProviderID: 00 00 54 11
2011/12/15 10:15:12 7E84A8 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2011/12/15 10:15:12 7E84A8 r found cardsystem nagra
2011/12/15 10:15:12 7E84A8 r ROM: T I G E R 0 0 3
2011/12/15 10:15:12 7E84A8 r REV: R e v 2 5 0
2011/12/15 10:15:12 7E84A8 r SER: ********
2011/12/15 10:15:12 7E84A8 r CAID: 183D
2011/12/15 10:15:12 7E84A8 r Prv.ID: 00 00 54 11 (sysid)
2011/12/15 10:15:12 7E84A8 r Activation Date : 01/01/2009
2011/12/15 10:15:12 7E84A8 r Expiry Date : 31/12/2099
2011/12/15 10:15:12 7E84A8 r [nagra-reader] ready for requests
2011/12/15 10:15:12 7A8238 s init for all local cards done
2011/12/15 10:15:12 7A8238 s anti cascading disabled
10:15:02.140: ACamd v0.6.1.8
10:15:02.171: MD-API Version 03.00 - 1.06
10:15:02.171: systems: registering CA system Cardclient, pri -15, ident 1000
10:15:02.171: structloaders: registering loader cardclient config
10:15:02.171: cardclients: registering cardclient Newcamd
10:15:02.171: cardclients: registering cardclient Newcamd2
10:15:02.171: cardclients: registering cardclient CCcamN
10:15:02.171: cardclients: registering cardclient Radegast
10:15:02.171: cardclients: registering cardclient Camd35
10:15:02.171: cardclients: registering cardclient EmuBox03
10:15:02.171: cardclients: registering cardclient Gbox
10:15:02.171: cardclients: registering cardclient GboxN
10:15:02.171: cardclients: registering cardclient MboxN
10:15:02.171: structloaders: registering loader smartcard data
10:15:02.171: systems: registering CA system SC-Irdeto, pri -10, ident 1001
10:15:02.171: feature: using feature SMARTCARD
10:15:02.171: registering Irdeto smartcard (id 49726474)
10:15:02.171: systems: registering CA system SC-Seca, pri -10, ident 1002
10:15:02.171: registering Seca smartcard (id 53656361)
10:15:02.171: systems: registering CA system SC-Viaccess, pri -10, ident 1003
10:15:02.171: registering Viaccess smartcard (id 56696173)
10:15:02.171: systems: registering CA system SC-Conax, pri -10, ident 1004
10:15:02.171: registering Conax smartcard (id 436f6e78)
10:15:02.171: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
10:15:02.171: registering Cryptoworks smartcard (id 4372576f)
10:15:02.171: systems: registering CA system SC-Nagra, pri -10, ident 1006
10:15:02.171: registering Nagra smartcard (id 4e616772)
10:15:02.171: systems: registering CA system SC-NDS, pri -10, ident 1007
10:15:02.171: registering NDS smartcard (id 56694732)
10:15:02.187: Monitor listen on port 1485
10:15:02.234: Engine [MD-API]
10:15:02.234: failed open C:\dvbdream11 dicembre 2011\Plugins\pip00\smartcard.conf: No such file or directory
10:15:02.234: loading cardclient config from C:\dvbdream11 dicembre 2011\Plugins\pip00\cardclient.conf
10:15:02.234: now using protocol version 525 (cdLen=8)
10:15:02.234: hostname=127.0.0.1 port=34000 emm=1 emmCaids 0500/ffff
10:15:02.234: Add Provider 00023800
10:15:02.234: Add Provider 00FFF430
10:15:02.234: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
10:15:02.234: client 'Newcamd' ready
10:15:02.234: now using protocol version 525 (cdLen=8)
10:15:02.234: hostname=127.0.0.1 port=34001 emm=1 emmCaids 183d/ffff
10:15:02.234: Add Provider 00023800
10:15:02.234: Add Provider 00FFF430
10:15:02.234: Newcamd: username=user password=pass key=0102030405060708091011121314 providers=none
10:15:02.234: client 'Newcamd' ready
10:15:02.234: ** registered systems:
10:15:02.234: ** SC-NDS (pri -10)
10:15:02.234: ** SC-Nagra (pri -10)
10:15:02.234: ** SC-Cryptoworks (pri -10)
10:15:02.234: ** SC-Conax (pri -10)
10:15:02.234: ** SC-Viaccess (pri -10)
10:15:02.234: ** SC-Seca (pri -10)
10:15:02.234: ** SC-Irdeto (pri -10)
10:15:02.234: ** Cardclient (pri -15)
10:15:02.234: no smartcard interface defined!
10:15:02.234:
10:15:02.234: Ch: 1003 - TV 4
10:15:02.234: Programm crc: 4F6BCB83
10:15:05.859:
10:15:05.859: Ch: 33 - LA7
10:15:05.859: Programm crc: BE33FD8C
10:15:05.859: PMT: ACamd_PMT.txt, search, not found PMT=0021 (AND SID=0E1E)
10:15:05.859: 0x0021 0x0E1E 0x183D 0x00000000 0x00AA 0x0120 11111110
10:15:05.906:
10:15:05.906: Ch: 33 - LA7
10:15:05.906: Programm crc: BE33FD8C
10:15:05.906: PMT: ACamd_PMT.txt, search, not found PMT=0021 (AND SID=0E1E)
10:15:05.906: 0x0021 0x0E1E 0x183D 0x00000000 0x00AA 0x0120 11111110
10:15:05.968: Incomming PackageSize [184]
10:15:05.968: Login attemp (1)
10:15:05.968: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:06.968: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:14.156: Login attemp (1)
10:15:14.156: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:15.125: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:18.046:
10:15:18.046: Ch: 136 - Rai 4
10:15:18.046: Programm crc: 6F8A1CBB
10:15:18.046: PMT: ACamd_PMT.txt, search, not found PMT=0088 (AND SID=2142)
10:15:18.046: 0x0088 0x2142 0x183D 0x00000000 0x1046 0x0137 11111110
10:15:18.093: Login attemp (1)
10:15:18.093: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:19.046: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:25.328: Login attemp (1)
10:15:25.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:26.296: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:38.328: Login attemp (1)
10:15:38.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:39.359: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:40.765:
10:15:40.765: Ch: 900 - Rai Movie
10:15:40.765: Programm crc: 659577B8
10:15:40.781: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:40.781: PMT: chcache.ini, 0384,2136,183D,00000000,1042,0137,Rai Movie
10:15:40.781: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:40.828: Login attemp (1)
10:15:40.828: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:41.781: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:47.328: Login attemp (1)
10:15:47.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:48.218: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:52.515:
10:15:52.515: Ch: 900 - Rai Movie
10:15:52.515: Programm crc: 659577B8
10:15:52.515: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:52.515: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:52.593: Login attemp (1)
10:15:52.593: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:53.546: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:55.312:
10:15:55.312: Ch: 900 - Rai Movie
10:15:55.312: Programm crc: 659577B8
10:15:55.312: PMT: ACamd_PMT.txt, search, not found PMT=0384 (AND SID=2136)
10:15:55.312: 0x0384 0x2136 0x183D 0x00000000 0x1042 0x0137 11111110
10:15:55.390: Login attemp (1)
10:15:55.390: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:56.359: socket: connect failed: Winsock Error 10061: Connection refused.
10:15:57.328: Login attemp (1)
10:15:57.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:15:58.281: socket: connect failed: Winsock Error 10061: Connection refused.
10:16:07.328: Login attemp (1)
10:16:07.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:16:08.437: socket: connect failed: Winsock Error 10061: Connection refused.
10:16:17.328: Login attemp (1)
10:16:17.328: connecting to 127.0.0.1:34001/tcp (127.0.0.1)
10:16:18.296: socket: connect failed: Winsock Error 10061: Connection refused.
>> OSCam << cardserver started at Thu Dec 15 10:14:55 2011
-------------------------------------------------------------------------------
2011/12/15 10:14:55 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/15 10:14:55 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/15 10:14:55 7A8238 s client max. idle=120 sec, debug level=0
2011/12/15 10:14:55 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/15 10:14:55 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/15 10:14:55 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/15 10:14:55 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/15 10:14:55 7A8238 s signal handling initialized (type=sysv)
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/15 10:14:55 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/15 10:14:55 7A8238 s monitor: disabled
2011/12/15 10:14:55 7A8238 s camd33: disabled
2011/12/15 10:14:55 7A8238 s camd35: disabled
2011/12/15 10:14:55 7A8238 s cs378x: disabled
2011/12/15 10:14:55 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/15 10:14:55 7A8238 s CAID: 0500
2011/12/15 10:14:55 7A8238 s provid #0: 000000
2011/12/15 10:14:55 7A8238 s radegast: disabled
2011/12/15 10:14:55 7A8238 s http disabled
2011/12/15 10:14:55 7A8238 s creating thread for device /dev/ttyS2
2011/12/15 10:14:55 7E84A8 r reader thread started (thread= 7E84A8, label=tivu, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/15 10:14:55 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/15 10:14:55 7A8238 s waiting for local card init
2011/12/15 10:14:58 7E84A8 r tivu card detected
2011/12/15 10:15:03 7E84A8 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/15 10:15:05 7E84A8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/15 10:15:06 7E84A8 r detect nagra tiger card
2011/12/15 10:15:10 7E84A8 r type: NAGRA, caid: 183D, IRD ID: FF 36 F0 6E
2011/12/15 10:15:10 7E84A8 r ProviderID: 00 00 54 11
2011/12/15 10:15:12 7E84A8 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2011/12/15 10:15:12 7E84A8 r found cardsystem nagra
2011/12/15 10:15:12 7E84A8 r ROM: T I G E R 0 0 3
2011/12/15 10:15:12 7E84A8 r REV: R e v 2 5 0
2011/12/15 10:15:12 7E84A8 r SER: ********
2011/12/15 10:15:12 7E84A8 r CAID: 183D
2011/12/15 10:15:12 7E84A8 r Prv.ID: 00 00 54 11 (sysid)
2011/12/15 10:15:12 7E84A8 r Activation Date : 01/01/2009
2011/12/15 10:15:12 7E84A8 r Expiry Date : 31/12/2099
2011/12/15 10:15:12 7E84A8 r [nagra-reader] ready for requests
2011/12/15 10:15:12 7A8238 s init for all local cards done
2011/12/15 10:15:12 7A8238 s anti cascading disabled
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da krosta » gio dic 15, 2011 10:46 am
giap2002 ha scritto:Mi dite per favore cosa non va ora? Infinity funziona?
Arivati a questo punto potresti anche iniziare a capire tu quando qualcosa non va, nel primo log di oscam (a causa di un qualche evento "Fringe"
)....ERROR opening device dev/ttyS2 a quel punto è anche inutile lanciare progdvb....
Il secondo log (tivusat) di oscam direi che sia ok però c'è qualcosa che blocca la connessione di acamd...hai qualche firewall installato? devi dare tutti i permessi a oscam e occhio al firewall di windows, prova a disabilitarlo.
powered by:TOSHIBA SATELLITE PRO C850-19N (provvisorio) + TT Connect S2-3650CI + DVBViewer PRO + 13°E + Invacom TWH 031 + 3xOMNIKEY 3121 USB + Philips 42PFL6007H/12 + YHT-294 + JBL SCS 178 + JBL ES150P
-
krosta - Aspirante Moderatore
- Messaggi: 742
- Iscritto il: mer nov 09, 2005 8:20 pm
- Località: Santa Cruz
da scaistar » gio dic 15, 2011 3:36 pm
minkia perchè adesso confondi pure le card?
Possiamo provare al momento una sola card e arrivare fino in fondo?
ti ho già detto che se oscam si chiude con "Cannot open device: dev/ttyS2" inutile proseguire con Acamd.. tanto la card non è stata riconosciuta e hai voglia di cambiare canale
Possiamo provare al momento una sola card e arrivare fino in fondo?
ti ho già detto che se oscam si chiude con "Cannot open device: dev/ttyS2" inutile proseguire con Acamd.. tanto la card non è stata riconosciuta e hai voglia di cambiare canale
-
scaistar - AMMINISTRATORE
- Messaggi: 7728
- Iscritto il: gio gen 01, 1970 12:00 am
da giap2002 » dom dic 18, 2011 5:36 pm
Ciao,
Ho provato e riprovato a lanciare oscam exe, ma oscam log mi dice che non riconosce le due card, sia la svizzera sia Tivusat. Ho provato a cancellare il programma Infinitismart da pannello di controllo / installazione applicazioni e da regedit a ripulirlo dai files di Infinity smart e subito dopo a riavviare. Queste operazioni l’ho fatte decine di volte. Il problema è che attraverso phsmtest le carte vengono regolarmente riconosciute. L’unico dubbio che ho è questo: nella guida all’istallazione di Infinity smart c’è scritto “Il lettore si comporterà adesso come una nuova periferica. Infatti Windows la rileva e chiede dei driver”. Windows non me la rileva e non mi chiede i drivers. Però una volta installato CDM20814, se vado su pannello di controllo e poi su sistema poi ancora su hardware vedo regolarmente la port com 3 che la configuro mettendo 1 al posto di 16 su tempo di latenza, e poi Ok Ok. Perché windows non mi dovrebbe rilevarmela e chiedermi i drivers?
Ho provato e riprovato a lanciare oscam exe, ma oscam log mi dice che non riconosce le due card, sia la svizzera sia Tivusat. Ho provato a cancellare il programma Infinitismart da pannello di controllo / installazione applicazioni e da regedit a ripulirlo dai files di Infinity smart e subito dopo a riavviare. Queste operazioni l’ho fatte decine di volte. Il problema è che attraverso phsmtest le carte vengono regolarmente riconosciute. L’unico dubbio che ho è questo: nella guida all’istallazione di Infinity smart c’è scritto “Il lettore si comporterà adesso come una nuova periferica. Infatti Windows la rileva e chiede dei driver”. Windows non me la rileva e non mi chiede i drivers. Però una volta installato CDM20814, se vado su pannello di controllo e poi su sistema poi ancora su hardware vedo regolarmente la port com 3 che la configuro mettendo 1 al posto di 16 su tempo di latenza, e poi Ok Ok. Perché windows non mi dovrebbe rilevarmela e chiedermi i drivers?
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da scaistar » dom dic 18, 2011 6:51 pm
ma perchè sei tornato così indietro? 
i log sono pieni di ATR e seriali il che significa che le card le riconoscevi tranquillamente.
perchè fare tutto questo casino?
ricapitoliamo.
Se metti l'INFINITY su NORMAL viene riconosciuto dal software? se SI sei apposto. Carica il MODULO #7 e passa lo switch sotto su > MODULE.
I driver di windows potrebbero ormai già essere presenti nel tuo PC quindi inutile perdere tempo su quello
Ora torniamo a OSCAM.
i log sono pieni di ATR e seriali il che significa che le card le riconoscevi tranquillamente.
perchè fare tutto questo casino?
ricapitoliamo.
Se metti l'INFINITY su NORMAL viene riconosciuto dal software? se SI sei apposto. Carica il MODULO #7 e passa lo switch sotto su > MODULE.
I driver di windows potrebbero ormai già essere presenti nel tuo PC quindi inutile perdere tempo su quello
Ora torniamo a OSCAM.
-
scaistar - AMMINISTRATORE
- Messaggi: 7728
- Iscritto il: gio gen 01, 1970 12:00 am
da giap2002 » lun dic 19, 2011 2:20 pm
Ciao, ho rifatto il percorso. Phsmtest legge regolarmente le card. Ho chiuso zona alarm, poi ho disistallato il firewal di windows . Ho rilanciato solo oscam exe e questo è il risultato del log. Mi dici se è Ok? Diversamente non so cosa fare. Le operazioni fatte sono semplicissime, non possono esserci errori. Però da quanto leggo gli errori ci sono. Sarà oscam che fa i capricci? Ma è quello di Krosta.
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Dec 19 15:14:36 2011
-------------------------------------------------------------------------------
2011/12/19 15:14:36 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/19 15:14:36 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/19 15:14:36 7A8238 s client max. idle=120 sec, debug level=0
2011/12/19 15:14:36 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/19 15:14:36 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/19 15:14:36 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/19 15:14:36 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/19 15:14:36 7A8238 s signal handling initialized (type=sysv)
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/19 15:14:36 7A8238 s monitor: disabled
2011/12/19 15:14:36 7A8238 s camd33: disabled
2011/12/19 15:14:36 7A8238 s camd35: disabled
2011/12/19 15:14:36 7A8238 s cs378x: disabled
2011/12/19 15:14:36 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/19 15:14:36 7A8238 s CAID: 0500
2011/12/19 15:14:36 7A8238 s provid #0: 000000
2011/12/19 15:14:36 7A8238 s radegast: disabled
2011/12/19 15:14:36 7A8238 s http disabled
2011/12/19 15:14:36 7A8238 s creating thread for device dev/ttyS2
2011/12/19 15:14:36 7E8498 r reader thread started (thread= 7E8498, label=svizzera, device=dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/19 15:14:36 7E8498 r ERROR opening device dev/ttyS2
2011/12/19 15:14:36 7E8498 r Cannot open device: dev/ttyS2
2011/12/19 15:14:36 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/19 15:14:36 7A8238 s waiting for local card init
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Dec 19 15:14:36 2011
-------------------------------------------------------------------------------
2011/12/19 15:14:36 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/19 15:14:36 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/19 15:14:36 7A8238 s client max. idle=120 sec, debug level=0
2011/12/19 15:14:36 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/19 15:14:36 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/19 15:14:36 7A8238 s Cannot open file "./oscam.services" (errno=2 No such file or directory)
2011/12/19 15:14:36 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/19 15:14:36 7A8238 s signal handling initialized (type=sysv)
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/12/19 15:14:36 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/19 15:14:36 7A8238 s monitor: disabled
2011/12/19 15:14:36 7A8238 s camd33: disabled
2011/12/19 15:14:36 7A8238 s camd35: disabled
2011/12/19 15:14:36 7A8238 s cs378x: disabled
2011/12/19 15:14:36 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/19 15:14:36 7A8238 s CAID: 0500
2011/12/19 15:14:36 7A8238 s provid #0: 000000
2011/12/19 15:14:36 7A8238 s radegast: disabled
2011/12/19 15:14:36 7A8238 s http disabled
2011/12/19 15:14:36 7A8238 s creating thread for device dev/ttyS2
2011/12/19 15:14:36 7E8498 r reader thread started (thread= 7E8498, label=svizzera, device=dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/19 15:14:36 7E8498 r ERROR opening device dev/ttyS2
2011/12/19 15:14:36 7E8498 r Cannot open device: dev/ttyS2
2011/12/19 15:14:36 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/19 15:14:36 7A8238 s waiting for local card init
- giap2002
- Nuovo Iscritto
- Messaggi: 64
- Iscritto il: lun nov 28, 2011 6:46 pm
da scaistar » lun dic 19, 2011 5:00 pm
ma è così complicato per te leggere il log?
non trova la periferica sulla porta COM2. e mi pare davvero strano che una volta te la legge.. e un'altra no.
di sicuro combini qualcosa tu. o cambi continuamente porta USB del computer. oppure stai usando un HUB?
vai in gestione periferiche e controlla che ci sia la "USB SERIAL PORT (COM3)".
scollega e ricollega l'Infinity caso mai (ricorda che deve essere lo switch su MODULE).
se non è com3 allora devi anche cambiare la dicitura ttyS2 in oscam.server ad esempio per COM5
Cannot open device: dev/ttyS2
non trova la periferica sulla porta COM2. e mi pare davvero strano che una volta te la legge.. e un'altra no.
di sicuro combini qualcosa tu. o cambi continuamente porta USB del computer. oppure stai usando un HUB?
vai in gestione periferiche e controlla che ci sia la "USB SERIAL PORT (COM3)".
scollega e ricollega l'Infinity caso mai (ricorda che deve essere lo switch su MODULE).
se non è com3 allora devi anche cambiare la dicitura ttyS2 in oscam.server ad esempio per COM5
device = /dev/ttyS4
-
scaistar - AMMINISTRATORE
- Messaggi: 7728
- Iscritto il: gio gen 01, 1970 12:00 am
da krosta » lun dic 19, 2011 6:13 pm
giap2002 ha scritto:Sarà oscam che fa i capricci? Ma è quello di Krosta.
Premesso che ogni pc fa storia a se, se pensi sia oscam a fare i capricci ti basta solo cambiare oscam.exe, anche se quella che ti ho passato l'ho già passata anche ad altri senza nessun problema.
Questa la uso da tempo e prima usavo questa http://tekreaders.com/oscam/cygwin/Old% ... n-5660.zip
powered by:TOSHIBA SATELLITE PRO C850-19N (provvisorio) + TT Connect S2-3650CI + DVBViewer PRO + 13°E + Invacom TWH 031 + 3xOMNIKEY 3121 USB + Philips 42PFL6007H/12 + YHT-294 + JBL SCS 178 + JBL ES150P
-
krosta - Aspirante Moderatore
- Messaggi: 742
- Iscritto il: mer nov 09, 2005 8:20 pm
- Località: Santa Cruz
Torna a Infinity USB Smart e Phoenix/Smartmouse
Chi c’è in linea
Visitano il forum: Nessuno e 3 ospiti