www.scaistar.com

da **krosta** » ven dic 09, 2011 11:23 pm

giap2002 ha scritto:oscam exe apre solo una finestra priva di contenuti senza alcuna scritta. Non so proprio cosa fare.

I contenuti della finestra li trovi nel file oscam.log nella cartella dove hai oscam.exe
A questo punto, avviando oscam.exe (enable=1 sul reader srg e enable=0 sul reader tivu) e aprendo il tuo player dvb cosa succede? apri la finestra di acamd e posta il contenuto...

**Sponsor**

da **giap2002** » sab dic 10, 2011 10:40 am

Ho lanciato oscam exe, si è aperta una finestra priva di scritte, poi ho lanciato il programma dvbdream e mi sono posizionato sui due programmi della svizzera. Dove avrò sbagliato?
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Dec 10 11:27:50 2011
-------------------------------------------------------------------------------
2011/12/10 11:27:50 3844 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-1
2011/12/10 11:27:50 3844 s max. clients=509, client max. idle=120 sec
2011/12/10 11:27:50 3844 s max. logsize=1000 Kb
2011/12/10 11:27:50 3844 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/10 11:27:50 3844 s shared memory initialized (size=4302198, fd=3)
2011/12/10 11:27:50 3844 s auth size=4756
2011/12/10 11:27:50 3844 s services reloaded: 0 services freed, 1 services loaded
2011/12/10 11:27:50 3844 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/10 11:27:50 3844 s signal handling initialized (type=sysv)
2011/12/10 11:27:50 3844 s 31 service-id's loaded
2011/12/10 11:27:50 3844 s 352 provid's loaded
2011/12/10 11:27:50 3844 s Cannot open oscam.version (errno=2)
2011/12/10 11:27:50 3844 s monitor: disabled
2011/12/10 11:27:50 3844 s camd 3.3x: disabled
2011/12/10 11:27:50 3844 s camd 3.5x: disabled
2011/12/10 11:27:50 3844 s cs378x: disabled
2011/12/10 11:27:50 3844 s newcamd: initialized (fd=7, port=34000, crypted)
2011/12/10 11:27:50 3844 s CAID: 0500
2011/12/10 11:27:50 3844 s provid #0: 000000
2011/12/10 11:27:50 3844 s cccam: disabled
2011/12/10 11:27:50 3844 s radegast: disabled
2011/12/10 11:27:50 3844 s logger started (pid=3060)
2011/12/10 11:27:50 3844 s resolver thread started
2011/12/10 11:27:50 3844 s http started (pid=1024)
2011/12/10 11:27:50 1024 h HTTP Server listening on port 0
2011/12/10 11:27:50 3844 s reader started (pid=2460, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/10 11:27:50 3844 s waiting for local card init
2011/12/10 11:27:53 2460 r02 card detected
2011/12/10 11:27:57 2460 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/10 11:27:59 2460 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/10 11:28:02 2460 r02 card system not supported
2011/12/10 11:28:02 2460 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/10 11:28:06 2460 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/10 11:28:06 2460 r02 Warning: D=0 is invalid, forcing D=1
2011/12/10 11:28:07 2460 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/10 11:28:08 2460 r02 type: Viaccess (standard atr), caid: 0500, serial: ********
2011/12/10 11:28:10 2460 r02 providers: 2 (FFF430,023800)
2011/12/10 11:28:10 2460 r02 [viaccess-reader] ready for requests
2011/12/10 11:28:10 2460 r02 [viaccess-reader] card detected
2011/12/10 11:28:11 3844 s init for all local cards done
2011/12/10 11:28:11 3844 s anti cascading disabled
2011/12/10 11:28:11 2460 r02 [viaccess-reader] serial: ********
2011/12/10 11:28:13 2460 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/10 11:28:15 2460 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/10 11:28:15 2460 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/10 11:28:15 2460 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/10 11:28:16 2460 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/10 11:28:16 2460 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/10 11:28:17 2460 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/10 11:28:17 2460 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/10 11:28:17 2460 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/10 11:28:18 2460 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/10 11:28:18 2460 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/10 11:28:18 2460 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05
2011/12/10 11:28:35 3844 s exit with signal 1
2011/12/10 11:28:35 3844 s cannot remove /tmp/oscam.version errno=(2)
2011/12/10 11:28:35 3844 s cardserver down

da **krosta** » sab dic 10, 2011 6:40 pm

giap2002 ha scritto:Ho lanciato oscam exe, si è aperta una finestra priva di scritte, poi ho lanciato il programma dvbdream e mi sono posizionato sui due programmi della svizzera. Dove avrò sbagliato?

era ora!!

secondo me la configurazione di oscam è a posto....
prova a cambiare versione di oscam, http://tekreaders.com/oscam/cygwin/Old% ... n-5660.zip

se non va...provane altre http://tekreaders.com/oscam/cygwin/inde ... eleases%2F

da **giap2002** » sab dic 10, 2011 6:44 pm

Prima cosa un ringraziamento "urlato" per quanto hai fatto. Seconda: per te è Ok, però non vedo nulla né sugli svizzeri né con tivusat. Proverò a scaricare un'altra versione e ti farò sapere. Di nuovo grazie. Ciao a presto

da **krosta** » sab dic 10, 2011 6:52 pm

prego, anche se i ringraziamenti si fanno a missione compiuta :wink:

dobbiamo sistemare quel exit with signal 1 che secondo me è dato da una versione non "corretta" di oscam

da **giap2002** » dom dic 11, 2011 10:53 am

Ciao Krosta, ho provato a cambiare Oscam exe, tantissimi mi dicono "Warning: keyword tiger_rsakey in reader section non ricognized". Di aprirsi la svezzera non ne vuole proprio sapere. Ho visto però in acamd v.0618 che dà questa configurazione:
Acamd

11:39:11.968: Ch: 406 - RSI LA 2
11:39:11.968: Programm crc: 2D8CD633
11:39:11.968: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
11:39:11.968: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
11:39:12.062: Incomming PackageSize [184]
11:39:13.984:
11:39:13.984: Ch: 402 - RSI LA 1
11:39:13.984: Programm crc: 12E065D6
11:39:13.984: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
11:39:13.984: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
11:39:22.906:
11:39:22.906: Ch: 402 - RSI LA 1
11:39:22.906: Programm crc: 12E065D6
11:39:22.906: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
11:39:22.906: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
11:39:27.656:
11:39:27.656: Ch: 402 - RSI LA 1
11:39:27.656: Programm crc: 12E065D6
11:39:27.656: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
11:39:27.656: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110

Ti invio anche l'ultima di oscam log:
>> OSCam << cardserver started at Sun Dec 11 11:20:38 2011
-------------------------------------------------------------------------------
2011/12/11 11:20:38 1328 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-1
2011/12/11 11:20:38 1328 s max. clients=509, client max. idle=120 sec
2011/12/11 11:20:38 1328 s max. logsize=1000 Kb
2011/12/11 11:20:38 1328 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/11 11:20:38 1328 s shared memory initialized (size=4302198, fd=3)
2011/12/11 11:20:38 1328 s auth size=4756
2011/12/11 11:20:38 1328 s services reloaded: 0 services freed, 1 services loaded
2011/12/11 11:20:38 1328 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/11 11:20:38 1328 s signal handling initialized (type=sysv)
2011/12/11 11:20:38 1328 s 31 service-id's loaded
2011/12/11 11:20:38 1328 s 352 provid's loaded
2011/12/11 11:20:38 1328 s Cannot open oscam.version (errno=2)
2011/12/11 11:20:38 1328 s monitor: disabled
2011/12/11 11:20:38 1328 s camd 3.3x: disabled
2011/12/11 11:20:38 1328 s camd 3.5x: disabled
2011/12/11 11:20:38 1328 s cs378x: disabled
2011/12/11 11:20:38 1328 s newcamd: initialized (fd=7, port=34000, crypted)
2011/12/11 11:20:38 1328 s CAID: 0500
2011/12/11 11:20:38 1328 s provid #0: 000000
2011/12/11 11:20:38 1328 s cccam: disabled
2011/12/11 11:20:38 1328 s radegast: disabled
2011/12/11 11:20:38 1328 s logger started (pid=3008)
2011/12/11 11:20:38 1328 s resolver thread started
2011/12/11 11:20:38 1328 s http started (pid=3048)
2011/12/11 11:20:38 3048 h HTTP Server listening on port 0
2011/12/11 11:20:38 1328 s reader started (pid=1400, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/11 11:20:38 1328 s waiting for local card init
2011/12/11 11:20:41 1400 r02 card detected
2011/12/11 11:20:45 1400 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/11 11:20:48 1400 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 11:20:50 1400 r02 card system not supported
2011/12/11 11:20:50 1400 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/11 11:20:54 1400 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/11 11:20:54 1400 r02 Warning: D=0 is invalid, forcing D=1
2011/12/11 11:20:55 1400 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 11:20:57 1400 r02 type: Viaccess (standard atr), caid: 0500, serial: *******
2011/12/11 11:20:59 1400 r02 providers: 2 (FFF430,023800)
2011/12/11 11:20:59 1400 r02 [viaccess-reader] ready for requests
2011/12/11 11:20:59 1400 r02 [viaccess-reader] card detected
2011/12/11 11:20:59 1328 s init for all local cards done
2011/12/11 11:20:59 1328 s anti cascading disabled
2011/12/11 11:20:59 1400 r02 [viaccess-reader] serial: *******
2011/12/11 11:21:01 1400 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/11 11:21:03 1400 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/11 11:21:03 1400 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/11 11:21:04 1400 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/11 11:21:04 1400 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/11 11:21:04 1400 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/11 11:21:05 1400 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/11 11:21:05 1400 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/11 11:21:06 1400 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/11 11:21:06 1400 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/11 11:21:06 1400 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/11 11:21:07 1400 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05

da **krosta** » dom dic 11, 2011 12:12 pm

giap2002 ha scritto:tantissimi mi dicono "Warning: keyword tiger_rsakey in reader section non ricognized"

la tiger_rsakey, serve per tivusat e nelle vecchie versioni come quella che stai usando la sintassi corretta è appunto tiger_rsakey mentre nella configurazione che ti ho suggerito c'è rsakey che è la sintassi per le versioni più recenti, quindi correggi a seconda se usi una vecchia oscam o una nuova...perchè ti ostini con una obsoleta 2532 ? prova questa http://www.oscam.to/wbb3/index.php?page ... e5a7c55cd8 e lascia rsakey....
Fai così....avvia oscam....lascialo caricare, poi apri dvbdream, vai su un canale srg, attendi qualche secondo e poi posti l'ultimo log di oscam.
C'è comunque qualcosa che non va, perchè con eneble=0 nella sezione reader il reader tivusat non dovrebbe essere considerato, ma se ti da l'errore sulla rsakey a quanto pare viene visto...che sia la vecchia versione che usi?

da **giap2002** » dom dic 11, 2011 12:30 pm

Ho fatto esattamente come mi hai detto. Ho scaricato la versione suggerita che mi ha riproposto la raskey ed ecco quanto è venuto fuori. Una domanda: l'Acamd che ti ho fatto vedere c'entra nulla?

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Dec 11 13:23:27 2011
-------------------------------------------------------------------------------
2011/12/11 13:23:27 7A8238 s >> OSCam << cardserver started, version 1.10rc-svn, build #5983 (i386-pc-cygwin)
2011/12/11 13:23:27 7A8238 s version=1.10rc-svn, build #5983, system=i386-pc-cygwin, nice=-1
2011/12/11 13:23:27 7A8238 s client max. idle=120 sec, debug level=0
2011/12/11 13:23:27 7A8238 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/11 13:23:27 7A8238 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/11 13:23:27 7A8238 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/12/11 13:23:27 7A8238 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/11 13:23:27 7A8238 s signal handling initialized (type=sysv)
2011/12/11 13:23:27 7A8238 s 31 service-id's loaded in 0ms
2011/12/11 13:23:27 7A8238 s 38 tier-id's loaded
2011/12/11 13:23:27 7A8238 s 352 provid's loaded
2011/12/11 13:23:27 7A8238 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/11 13:23:27 7A8238 s monitor: disabled
2011/12/11 13:23:27 7A8238 s camd33: disabled
2011/12/11 13:23:27 7A8238 s camd35: disabled
2011/12/11 13:23:27 7A8238 s cs378x: disabled
2011/12/11 13:23:30 7A8238 s newcamd: initialized (fd=6, port=34000, crypted)
2011/12/11 13:23:30 7A8238 s CAID: 0500
2011/12/11 13:23:30 7A8238 s provid #0: 000000
2011/12/11 13:23:30 7A8238 s radegast: disabled
2011/12/11 13:23:30 7A8238 s http disabled
2011/12/11 13:23:30 7A8238 s creating thread for device /dev/ttyS2
2011/12/11 13:23:30 7F64E0 r reader thread started (thread= 7F64E0, label=srg, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/11 13:23:30 7A8238 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/11 13:23:30 7A8238 s waiting for local card init
2011/12/11 13:23:33 7F64E0 r srg card detected
2011/12/11 13:23:37 7F64E0 r ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/11 13:23:40 7F64E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 13:23:43 7F64E0 r card system not supported
2011/12/11 13:23:43 7F64E0 r Normal mode failed, reverting to Deprecated Mode
2011/12/11 13:23:47 7F64E0 r ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/11 13:23:47 7F64E0 r Warning: D=0 is invalid, forcing D=1
2011/12/11 13:23:49 7F64E0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 13:23:50 7F64E0 r [viaccess-reader] using ecm #505 for long viaccess ecm
2011/12/11 13:23:51 7F64E0 r type: Viaccess (standard atr), caid: 0500, serial: *******
2011/12/11 13:23:53 7F64E0 r providers: 2 (FFF430,023800)
2011/12/11 13:23:53 7F64E0 r [viaccess-reader] ready for requests
2011/12/11 13:23:53 7F64E0 r found cardsystem viaccess
2011/12/11 13:23:53 7F64E0 r [viaccess-reader] card detected
2011/12/11 13:23:53 7F64E0 r [viaccess-reader] serial: ********
2011/12/11 13:23:55 7F64E0 r provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/11 13:23:57 7F64E0 r provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/11 13:23:57 7F64E0 r class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/11 13:23:58 7F64E0 r class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/11 13:23:58 7F64E0 r class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/11 13:23:58 7F64E0 r class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/11 13:23:59 7F64E0 r class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/11 13:23:59 7F64E0 r class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/11 13:23:59 7F64E0 r class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/11 13:24:00 7F64E0 r class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/11 13:24:00 7F64E0 r class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/11 13:24:00 7F64E0 r class: 01, expiry date: 2010/10/21 - 2010/12/05
2011/12/11 13:24:06 7A8238 s init for all local cards done
2011/12/11 13:24:06 7A8238 s anti cascading disabled

da **krosta** » dom dic 11, 2011 12:40 pm

ecco il problema (spero)...dal log di oscam non si vede nessun tentativo di connessione da parte di acamd....
hai il cardclient.conf nella cartella insiema ad acamd.dll?
alla fine del cardclient.conf hai inserito:
newcamd:127.0.0.1:34000:1/0500/FFFF:user:pass:0102030405060708091011121314:023800,FFF430
newcamd:127.0.0.1:34001:1/183D/FFFF:user:pass:0102030405060708091011121314
stando attento che non ci siano # davanti?

da **giap2002** » dom dic 11, 2011 1:27 pm

Il cardclient.conf sta insieme a circa 70 file insieme agli altri files di acamd.
Nel cardclient.conf ho scritto: newcamd:127.0.0.1:34000:1/0500/FFFF:user:pass:0102030405060708091011121314:023800,FFF430
newcamd:127.0.0.1:34001:1/183D/FFFF:user:pass:0102030405060708091011121314

da **krosta** » dom dic 11, 2011 1:44 pm

70 file??!!

io ho acamd.dll cardclient.confacamd.ini e una cartella acamdtmp....

da **giap2002** » dom dic 11, 2011 2:27 pm

Si, prima i files erano sparsi. Ora su tuo suggerimento ho messo il files Acamd.dll, acamd.ini, acamdmonitor.exe, cardclient.conf (che contiene le sole due newcamd) mdapifex.ax, smartcard (che l'ho lasciata come'era senza configurarla) nella cartella AcamdTmp.
Ti mando l'ultimo log di Acamd:
15:16:56.039: Ch: 402 - RSI LA 1
15:16:56.039: Programm crc: 12E065D6
15:16:56.039: PMT: ACamd_PMT.txt, search, not found PMT=0192 (AND SID=36B3)
15:17:06.055: socket: select timed out (20000 ms)
15:17:06.055: no connect answer from 127.0.0.1:34000
15:17:06.055: 0x0192 0x36B3 0x0500 0x00023800 0x02CE 0x025A 11111110
15:17:06.086: Login attemp (1)
15:17:06.086: connecting to 127.0.0.1:34000/tcp (127.0.0.1)
15:17:12.789: Newcamd 0: CaID=0500 admin=1 srvUA=00000000C29B4910 provider 000000/0000000000000000 023800/00000000C29B4910 FFF430/00000000C29B4910
15:17:12.789: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:17:12.789: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:12.805: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:17:12.805: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:15.899: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:17:15.899: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:25.868: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.016)
15:17:25.868: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:35.836: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.016)
15:17:35.836: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:45.930: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.016)
15:17:45.930: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:17:55.883: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:17:55.883: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:18:05.852: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:18:05.852: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:18:12.930:
15:18:12.930: Ch: 406 - RSI LA 2
15:18:12.930: Programm crc: 2D8CD633
15:18:12.930: PMT: ACamd_PMT.txt, search, not found PMT=0196 (AND SID=36B9)
15:18:12.930: 0x0196 0x36B9 0x0500 0x00023800 0x02CE 0x025A 11111110
15:18:12.993: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.016)
15:18:12.993: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:18:15.852: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.015)
15:18:15.852: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:18:25.914: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:18:25.914: Newcamd 0: ECM [02CE][0500/00023800] not able to decode
15:18:35.899: Newcamd 0: ECM [02CE][0500/00023800] Pro (0.000)
15:18:35.899: Newcamd 0: ECM [02CE][0500/00023800] not able to decode

da **krosta** » dom dic 11, 2011 2:34 pm

no aspetta...prova a mettere acamd.dll e cardclient.conf (e basta cancella tutto il resto) nella cartella pip00

da **giap2002** » dom dic 11, 2011 3:24 pm

Acamdmonitor.exe e Mdapifilter li devo cancellare?

da **krosta** » dom dic 11, 2011 3:28 pm

si si vai tranquillo

www.scaistar.com

Infinity Usb e abbo Srg

Chi c’è in linea