Sky e OSCAM: not found/rejected group

[mighty]

Abbo è la label... Il punto è che spesso e volentieri mi dà errore ATR adesso, quando non me lo dà mi dice card ejected. È normale?
Perché poi continua col rejected group...
Miiii che delirio!!

[krosta]

io non ho mai visto la label quando inizializza, comunque...prova a cambiare le dll magari con queste
http://oscam.ump2002.net/board/thread.p ... r=0&page=3
http://oscam.ump2002.net/board/thread.p ... r=0&page=5
che sono + vecchie, prova anche a cambiare versione di oscam partendo da quelle + vecchie.
card ejected...non è normale
potrebbe essere un problema di configurazione del reader?!

[mighty]

Ho provato, ma non cambia niente, anzi!
Il problema è che se lascio la card nel reader prima di far partire Oscam mi rimane in standby senza che succeda niente (non fa l'ATR).
Se invece muovo la card nel lettore fa l'ATR, ma dà errore (o di ATR, o quanto segue)

Codice: Seleziona tutto

2011/03/19 20:26:11   1784 s   reader started (pid=8132, device=/dev/ttyS18, detect=cd, mhz=357, cardmhz=357)
2011/03/19 20:26:11   1784 s   waiting for local card init
2011/03/19 20:26:11   7968 h   HTTP Server listening on port 8185
2011/03/19 20:26:14   1784 s   init for all local cards done
2011/03/19 20:26:14   1784 s   anti cascading disabled
2011/03/19 20:26:15   8132 r02 card detected
2011/03/19 20:26:20   8132 r02 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/03/19 20:26:21   8132 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/03/19 20:26:22   8132 r02 [videoguard2-reader] type: VideoGuard Sky Italia new (093B)
2011/03/19 20:26:22   8132 r02 card system not supported
2011/03/19 20:26:22   8132 r02 Normal mode failed, reverting to Deprecated Mode
2011/03/19 20:26:22   8132 r02 card initializing error

oppure (con un'altra versione)

Codice: Seleziona tutto

2011/03/19 20:28:22   DE81D0 s waiting for local card init
2011/03/19 20:28:24   E38008 r sky card detected
2011/03/19 20:28:30   E38008 r ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/03/19 20:28:31   E38008 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/03/19 20:28:32   E38008 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=13
2011/03/19 20:28:32   E38008 r ERROR in IO_Serial_Write u=-1 to_send=5 errno=13
2011/03/19 20:28:32   E38008 r card system not supported
2011/03/19 20:28:32   E38008 r Normal mode failed, reverting to Deprecated Mode
2011/03/19 20:28:32   E38008 r card initializing error
2011/03/19 20:28:32   DE81D0 s init for all local cards done
2011/03/19 20:28:32   DE81D0 s anti cascading disabled

Se infine inserisco la card al volo, a volte mi fa l'ATR corretto, ma poi dà card ejected...
Proverò a compare un altro smartmouse e vediamo...

[krosta]

Proverò a compare un altro smartmouse e vediamo...

Saggia decisione
Vai tranquillo con Infinity USB Smart oppure omnikey

[scaistar]

"abbo" è la label che lui ha assegnato

newcamd:127.0.0.1:34001:1/0000/0000:marco:marco:0102030405060708091011121314

credo tu debba modificare questa riga

newcamd:localhost:34001:1/093b/0000:marco:marco:0102030405060708091011121314

[mighty]

Ok grazie, stasera provo. Il fatto che mi dica card ejected invece è normale?

[scaistar]

card ejected lo da quando estrai la card dal lettore.

se lo da così senza motivo.. probabilmente smette di leggere la card, forse per qualche problema col lettore o con le sue impostazioni

[mighty]

Ovviamente la card non la estraggo. Il messaggio me lo dà sistematicamente ogni volta che finisce l'ATR con tutto l'elenco dei pacchetti abilitati alla visione... Ora cmq ho ordinato un nuovo smartmouse, USB questa volta, almeno mi evito il potenziale problema aggiuntivo del converter...
Grazie mille intanto per le dritte, vi farò sapere quando arriva il nuovo smartmouse!

[krosta]

almeno mi evito il potenziale problema aggiuntivo del converter...

adattatore seriale-usb?...se lo dicevi prima...è noto che possono generare problemi!

[mighty]

Sì, quello. In realtà ha sempre funzionato bene per altre cose, ma evidentemente è un casino in più...
Spero che arrivi a breve il nuovo SM così vi faccio sapere!

[mighty]

È arrivato lo smartmouse nuovo, ma ora non riesco nemmeno a fargli vedere correttamente la tessera... In Oscam mi becco:

Codice: Seleziona tutto

2011/04/04 20:19:24  10B81D0 s newcamd: initialized (fd=6, port=34001, crypted)
2011/04/04 20:19:24  10B81D0 s CAID: 093B
2011/04/04 20:19:24  10B81D0 s provid #0: 000000
2011/04/04 20:19:24  10B81D0 s cccam: initialized (fd=7, port=13000, crypted)
2011/04/04 20:19:24  10B81D0 s radegast: disabled
2011/04/04 20:19:24  10B81D0 s http thread started
2011/04/04 20:19:24  1104DD0 h HTTP Server listening on port 8185
2011/04/04 20:19:24  10B81D0 s creating thread for device /dev/ttyS19
2011/04/04 20:19:24  1108338 r reader thread started (thread= 1108338, label=sky, device=/dev/ttyS19, detect=cd, mhz=357, cardmhz=357)
2011/04/04 20:19:24  10B81D0 s loadbalancer: can't read from file /cygdrive/c/Users/Marco/AppData/Local/Temp/_oscam/stat
2011/04/04 20:19:24  10B81D0 s waiting for local card init
2011/04/04 20:19:26  10B81D0 s init for all local cards done
2011/04/04 20:19:26  10B81D0 s anti cascading disabled
2011/04/04 20:19:29  1108338 r sky card detected
2011/04/04 20:19:33  1108338 r ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/04/04 20:19:33  1108338 r ERROR: Parse_ATR returned error
2011/04/04 20:19:33  1108338 r Error activating card.
2011/04/04 20:19:34  1108338 r Error activating card.
2011/04/04 20:19:34  1108338 r Error activating card.
2011/04/04 20:19:35  1108338 r card initializing error

Sarà colpa di Win7 a 64bit?

[scaistar]

stai usando il MOD#7?

[mighty]

Ovvero?

[mighty]

Questo è quanto ottengo loggando tutto:

Codice: Seleziona tutto

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Mon Apr  4 23:59:49 2011
-------------------------------------------------------------------------------
2011/04/04 23:59:49    560 s   version=1.00-svn, build #3353, system=i386-pc-cygwin, nice=-20
2011/04/04 23:59:49    560 s   max. clients=509, client max. idle=120 sec, debug level=63
2011/04/04 23:59:49    560 s   max. logsize=unlimited
2011/04/04 23:59:49    560 s   client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/04/04 23:59:49    560 s   auth size=4772
2011/04/04 23:59:49    560 s   services reloaded: 0 services freed, 21 services loaded
2011/04/04 23:59:49    560 s   userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/04/04 23:59:49    560 s   signal handling initialized (type=sysv)
2011/04/04 23:59:49    560 s   449 service-id's loaded
2011/04/04 23:59:49    560 s   38 tier-id's loaded
2011/04/04 23:59:49    560 s   1000 provid's loaded
2011/04/04 23:59:49    560 s   monitor: disabled
2011/04/04 23:59:49    560 s   camd 3.3x: disabled
2011/04/04 23:59:49    560 s   camd 3.5x: disabled
2011/04/04 23:59:49    560 s   cs378x: disabled
2011/04/04 23:59:49    560 s   newcamd: initialized (fd=6, port=34001, crypted)
2011/04/04 23:59:49    560 s   CAID: 093B
2011/04/04 23:59:49    560 s   provid #0: 000000
2011/04/04 23:59:49    560 s   cccam: initialized (fd=7, port=13000, crypted)
2011/04/04 23:59:49    560 s   radegast: disabled
2011/04/04 23:59:49    560 s   http thread started
2011/04/04 23:59:49    560 h   HTTP Server listening on port 8185
2011/04/04 23:59:49    560 s   creating thread for device /dev/ttyS19 slot 0 with ridx 0 cs_idx 2
2011/04/04 23:59:49    560 r02 IFD: Opening device /dev/ttyS19

2011/04/04 23:59:49    560 s   reader thread started (pid=560, device=/dev/ttyS19, detect=cd, mhz=357, cardmhz=357)
2011/04/04 23:59:49    560 s   waiting for local card init
2011/04/04 23:59:49    560 r02 standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 1200
2011/04/04 23:59:49    560 r02 IO: Setting properties

2011/04/04 23:59:49    560 r02 IO: Setting DTR=1
2011/04/04 23:59:49    560 r02 IO: Setting RTS=0
2011/04/04 23:59:49    560 r02 IO: Receiving:
2011/04/04 23:59:49            7D
2011/04/04 23:59:49    560 r02 IO: Receiving:
2011/04/04 23:59:49            52
2011/04/04 23:59:49    560 r02 IO: Receiving:
2011/04/04 23:59:49            7F
2011/04/04 23:59:49    560 r02 IO: Receiving:
2011/04/04 23:59:49            TIMEOUT
2011/04/04 23:59:49    560 r02 IO: Receiving:
TIMEOUT
2011/04/04 23:59:50    560 r02 IFD: Initializing reader sky type=5

2011/04/04 23:59:50    560 r02 standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 9600
2011/04/04 23:59:50    560 r02 IO: Setting properties

2011/04/04 23:59:50    560 r02 IO: Receiving:
03
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            40
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            37
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            5B
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            BF
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            F5
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            FE
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            0F
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            33
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            F2
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            37
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            69
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            00
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            AD
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            F5
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            F4
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            FE
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            FF
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            6D
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            D5
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:50            3F
2011/04/04 23:59:50    560 r02 IO: Receiving:
2011/04/04 23:59:51            TIMEOUT
2011/04/04 23:59:51    560 r02 IFD: Device /dev/ttyS19 succesfully opened

2011/04/04 23:59:51    560 r02 ct_init on /dev/ttyS19: 1
2011/04/04 23:59:52    560 r02 card detected
2011/04/04 23:59:52    560 r02 IFD: Activating card in reader sky

2011/04/04 23:59:52    560 r02 IFD: Resetting card:

2011/04/04 23:59:52    560 r02 IFD: Phoenix Setting baudrate to 9600

2011/04/04 23:59:52    560 r02 standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 9600
2011/04/04 23:59:52    560 r02 IO: Setting properties

2011/04/04 23:59:52    560 r02 IO: Receiving:
TIMEOUT
2011/04/04 23:59:53    560 r02 IFD: Setting parity from Even to Even

2011/04/04 23:59:53    560 r02 IO: Setting RTS=1
2011/04/04 23:59:53    560 r02 IO: Setting RTS=0
2011/04/04 23:59:53    560 r02 IO: Receiving:
03
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            40
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            37
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            5B
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            BF
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            F5
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            FE
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            0F
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            33
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            F2
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            37
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            69
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            00
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            AD
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            F5
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            F4
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            FE
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            FF
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            6D
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            D5
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:53            3F
2011/04/04 23:59:53    560 r02 IO: Receiving:
2011/04/04 23:59:55            TIMEOUT
2011/04/04 23:59:55    560 r02 IO: Receiving:
TIMEOUT
2011/04/04 23:59:56    560 r02 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/04/04 23:59:56    560 r02 TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2011/04/04 23:59:56    560 r02 TA2=80 TC2=0F no TD2 means T0
2011/04/04 23:59:56    560 r02 1 protocol types detected. Historical bytes: 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2011/04/04 23:59:56    560 r02 Specific mode: T0, F=372, D=4.000000, N=2

2011/04/04 23:59:56    560 r02 IFD: Phoenix Setting baudrate to 38400

2011/04/04 23:59:56    560 r02 standard baudrate: cardmhz=357 mhz=357 -> effective baudrate 38400
2011/04/04 23:59:56    560 r02 IO: Setting properties

2011/04/04 23:59:56    560 r02 Setting baudrate to 38400
2011/04/04 23:59:56    560 r02 Setting timings: timeout=374 ms, block_delay=0 ms, char_delay=0 ms
2011/04/04 23:59:56    560 r02 Protocol: T=0: WWT=14400, Clockrate=3571200

2011/04/04 23:59:56    560 r02 IFD: Setting parity from Even to Odd

2011/04/04 23:59:56    560 r02 ERROR, function call IO_Serial_SetParity (reader, parity) returns error.
2011/04/04 23:59:56    560 r02 ERROR, function call ICC_Async_SetParity(reader, parity) returns error.
2011/04/04 23:59:56    560 r02 ERROR, function call SetRightParity (reader) returns error.
2011/04/04 23:59:56    560 r02 ERROR: Parse_ATR returned error
2011/04/04 23:59:56    560 r02 Error activating card.
2011/04/04 23:59:56    560 r02 IFD: Activating card in reader sky

2011/04/04 23:59:56    560 r02 IFD: Resetting card:

2011/04/04 23:59:56    560 r02 IFD: Phoenix Setting baudrate to 9600

2011/04/04 23:59:56    560 r02 ERROR, function call tcgetattr (reader->handle, &tio) != 0 returns error.
2011/04/04 23:59:56    560 r02 ERROR, function call Phoenix_SetBaudrate (reader, DEFAULT_BAUDRATE) returns error.
2011/04/04 23:59:56    560 r02 ERROR, function call Phoenix_Reset(reader, atr) returns error.
2011/04/04 23:59:56    560 r02 Error activating card.
2011/04/04 23:59:57    560 r02 IFD: Activating card in reader sky

2011/04/04 23:59:57    560 r02 IFD: Resetting card:

2011/04/04 23:59:57    560 r02 IFD: Phoenix Setting baudrate to 9600

2011/04/04 23:59:57    560 r02 ERROR, function call tcgetattr (reader->handle, &tio) != 0 returns error.
2011/04/04 23:59:57    560 r02 ERROR, function call Phoenix_SetBaudrate (reader, DEFAULT_BAUDRATE) returns error.
2011/04/04 23:59:57    560 r02 ERROR, function call Phoenix_Reset(reader, atr) returns error.
2011/04/04 23:59:57    560 r02 Error activating card.
2011/04/04 23:59:57    560 r02 IFD: Activating card in reader sky

2011/04/04 23:59:57    560 r02 IFD: Resetting card:

2011/04/04 23:59:57    560 r02 IFD: Phoenix Setting baudrate to 9600

2011/04/04 23:59:57    560 r02 ERROR, function call tcgetattr (reader->handle, &tio) != 0 returns error.
2011/04/04 23:59:57    560 r02 ERROR, function call Phoenix_SetBaudrate (reader, DEFAULT_BAUDRATE) returns error.
2011/04/04 23:59:57    560 r02 ERROR, function call Phoenix_Reset(reader, atr) returns error.
2011/04/04 23:59:57    560 r02 Error activating card.
2011/04/04 23:59:58    560 r02 IFD: Activating card in reader sky

2011/04/04 23:59:58    560 r02 IFD: Resetting card:

2011/04/04 23:59:58    560 r02 IFD: Phoenix Setting baudrate to 9600

2011/04/04 23:59:58    560 r02 ERROR, function call tcgetattr (reader->handle, &tio) != 0 returns error.
2011/04/04 23:59:58    560 r02 ERROR, function call Phoenix_SetBaudrate (reader, DEFAULT_BAUDRATE) returns error.
2011/04/04 23:59:58    560 r02 ERROR, function call Phoenix_Reset(reader, atr) returns error.
2011/04/04 23:59:58    560 r02 Error activating card.
2011/04/04 23:59:58    560 r02 card initializing error
2011/04/04 23:59:59    560 s   init for all local cards done
2011/04/04 23:59:59    560 s   anti cascading disabled

[mighty]

Dunque, aggiungendo

Codice: Seleziona tutto

deprecated = 1

a oscam.server ottengo questo:

Codice: Seleziona tutto

2011/04/05  0:06:09   4604 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/05  0:06:09   4604 r02 IFD: Card in reader sky succesfully activated

2011/04/05  0:06:10   4604 r02 [videoguard2-reader] in videoguard2_card_init
2011/04/05  0:06:10   4604 r02 [videoguard2-reader] type: VideoGuard Sky Italia (093B), baseyear: 1997
2011/04/05  0:06:10   4604 r02 write to cardreader sky:
2011/04/05  0:06:10            D0 74 01 80 01
2011/04/05  0:06:10   4604 r02 IFD Transmit:
2011/04/05  0:06:10            D0 74 01 80 01
2011/04/05  0:06:10   4604 r02 IO: Sending:
2011/04/05  0:06:10            F4 D1 7F FE 7F
2011/04/05  0:06:10   4604 r02 IFD Transmit succesful
2011/04/05  0:06:10   4604 r02 IO: Receiving:
F4 D1 7F FE 7F
2011/04/05  0:06:10   4604 r02 IO: Receiving:
2011/04/05  0:06:13            TIMEOUT
2011/04/05  0:06:13   4604 r02 ERROR, function call IO_Serial_Read (reader, timeout + IFD_TOWITOKO_TIMEOUT, size, buffer) returns error.
2011/04/05  0:06:13   4604 r02 ERROR, function call Phoenix_Receive (reader, data, size, reader->read_timeout) returns error.
2011/04/05  0:06:13   4604 r02 ERROR, function call ICC_Async_Receive (reader, 1, buffer + recv) returns error.
2011/04/05  0:06:13   4604 r02 ERROR, function call Protocol_T0_Command (reader, command, command_len, rsp, lr) returns error.
2011/04/05  0:06:13   4604 r02 answer from cardreader sky:
2011/04/05  0:06:13   4604 r02 [videoguard-reader] failed to read 7401 cmd length (50 d0)
2011/04/05  0:06:13   4604 r02 card system not supported
2011/04/05  0:06:13   4604 r02 card initializing error
2011/04/05  0:06:13   4604 s   init for all local cards done
2011/04/05  0:06:13   4604 s   anti cascading disabled

Un piccolo miglioramento, ma ancora non va direi...