Problema mediaset premium con smartmouse seriale puro a 3 le

[Gino81]

Salve, mi sono appena iscritto.
Vorrei vedere mediaset premium sul pc.Ho uno smartmose seriale puro a 3 led rosso, verde e arancione, alimentato con un alimentatore universale settato a 12v.
per il collegamento al pc utilizzo un adattatore usb seriale che mi attiva una porta com 8.
Il led arancione è fisso, il verde lampeggia ogni tanto mentre il rosso è sempre spento. i jumper credo siano settati correttamente in modalità phoenix/3,57 mhz (credo)
Avviando oscam loader ho un "card detected" sia con una scheda premium blu scaduta, sia con la tessera silver attiva.

oscam mi da il seguente log:




-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Dec 3 14:05:47 2010
-------------------------------------------------------------------------------
2010/12/03 14:05:47 2040 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/03 14:05:47 2040 s max. clients=509, client max. idle=120 sec
2010/12/03 14:05:47 2040 s max. logsize=1000 Kb
2010/12/03 14:05:47 2040 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/03 14:05:47 2040 s shared memory initialized (size=4302198, fd=3)
2010/12/03 14:05:47 2040 s auth size=4756
2010/12/03 14:05:47 2040 s services reloaded: 0 services freed, 1 services loaded
2010/12/03 14:05:47 2040 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/03 14:05:47 2040 s signal handling initialized (type=sysv)
2010/12/03 14:05:47 2040 s 31 service-id's loaded
2010/12/03 14:05:47 2040 s 352 provid's loaded
2010/12/03 14:05:47 2040 s Cannot open oscam.version (errno=2)
2010/12/03 14:05:47 2040 s monitor: disabled
2010/12/03 14:05:47 2040 s camd 3.3x: disabled
2010/12/03 14:05:47 2040 s camd 3.5x: initialized (fd=7, port=20000)
2010/12/03 14:05:47 2040 s cs378x: disabled
2010/12/03 14:05:47 2040 s newcamd: initialized (fd=8, port=34001, crypted)
2010/12/03 14:05:47 2040 s CAID: 1805
2010/12/03 14:05:47 2040 s provid #0: 000000
2010/12/03 14:05:47 2040 s cccam: disabled
2010/12/03 14:05:47 2040 s radegast: disabled
2010/12/03 14:05:47 2040 s logger started (pid=4600)
2010/12/03 14:05:47 2040 s resolver thread started
2010/12/03 14:05:47 2040 s http started (pid=3652)
2010/12/03 14:05:47 3652 h HTTP Server listening on port 8189
2010/12/03 14:05:47 2040 s reader started (pid=4808, device=/dev/ttyS7, detect=ring, mhz=500, cardmhz=368)
2010/12/03 14:05:47 2040 s waiting for local card init
2010/12/03 14:05:49 4808 r02 card detected
2010/12/03 14:05:58 4808 r02 Error activating card.
2010/12/03 14:06:07 4808 r02 Error activating card.
2010/12/03 14:06:17 4808 r02 Error activating card.
2010/12/03 14:06:26 4808 r02 Error activating card.
2010/12/03 14:06:35 4808 r02 Error activating card.
2010/12/03 14:06:36 4808 r02 card initializing error
2010/12/03 14:06:36 2040 s init for all local cards done
2010/12/03 14:06:36 2040 s anti cascading disabled

com'è la situazione?
la cosa strana è che se estraggo la tessera mi da comunque card detected?
qualcuno può aiutarmi?
Grazie in anticipo a tutti.

[scaistar]

se la configurazione in oscam.server è corretta, non ti rimane altro che fare le prove con le altre combinazioni di jumper.
se nemmeno va mi sa che è l'adattatore che ti frega.
l'ideale sarebbe fare qualche prova anche con altro tipo di card

[Gino81]

Ciao, ti ringrazio per l'interessamento
La config di OSCAM.SERVER è questa:



ma con l'adattatore usb seriale devo settare CD o RING?

[scaistar]

non penso faccia molta differenza. e cmq.. a provarli entrambi ci metti poco.. ma suppongo tu l'abbia già fatto

[Gino81]

Allora, dopo vari tentativi mi sa che è migliorato qualcosa.Onde evitare di sfilare ogni volta la card attiva dalla cam del tv, ho fatto delle prove con una card scaduta blu e questo è il risultato:



-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Dec 4 12:49:52 2010
-------------------------------------------------------------------------------
2010/12/04 12:49:52 4536 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/04 12:49:52 4536 s max. clients=509, client max. idle=120 sec
2010/12/04 12:49:52 4536 s max. logsize=1000 Kb
2010/12/04 12:49:52 4536 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/04 12:49:52 4536 s shared memory initialized (size=4302198, fd=3)
2010/12/04 12:49:52 4536 s auth size=4756
2010/12/04 12:49:52 4536 s services reloaded: 0 services freed, 1 services loaded
2010/12/04 12:49:52 4536 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/04 12:49:52 4536 s signal handling initialized (type=sysv)
2010/12/04 12:49:52 4536 s 31 service-id's loaded
2010/12/04 12:49:52 4536 s 352 provid's loaded
2010/12/04 12:49:52 4536 s Cannot open oscam.version (errno=2)
2010/12/04 12:49:52 4536 s monitor: disabled
2010/12/04 12:49:52 4536 s camd 3.3x: disabled
2010/12/04 12:49:52 4536 s camd 3.5x: initialized (fd=7, port=20000)
2010/12/04 12:49:52 4536 s cs378x: disabled
2010/12/04 12:49:52 4536 s newcamd: initialized (fd=8, port=34001, crypted)
2010/12/04 12:49:52 4536 s CAID: 1805
2010/12/04 12:49:52 4536 s provid #0: 000000
2010/12/04 12:49:52 4536 s cccam: disabled
2010/12/04 12:49:52 4536 s radegast: disabled
2010/12/04 12:49:52 4536 s logger started (pid=4196)
2010/12/04 12:49:52 4536 s resolver thread started
2010/12/04 12:49:52 4536 s http started (pid=4936)
2010/12/04 12:49:52 4536 s reader started (pid=1672, device=/dev/ttyS7, detect=cd, mhz=357, cardmhz=368)
2010/12/04 12:49:52 4536 s waiting for local card init
2010/12/04 12:49:52 4936 h HTTP Server listening on port 8189
2010/12/04 12:49:55 1672 r02 card detected
2010/12/04 12:50:00 1672 r02 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 4E 43 4D 45 44 30 30 35 20 52 65 76 35 30 30 6C
2010/12/04 12:50:01 1672 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/04 12:50:02 1672 r02 detect nagra tiger card
2010/12/04 12:50:02 1672 r02 type: NAGRA, caid: 1802, IRD ID: FE C0 F7 48
2010/12/04 12:50:02 1672 r02 ProviderID: 00 00 8D 11
2010/12/04 12:50:03 1672 r02 ROM: N C M E D 0 0 5
2010/12/04 12:50:03 1672 r02 REV: R e v 5 0 0
2010/12/04 12:50:03 1672 r02 SER: 7C 40 FF CA
2010/12/04 12:50:03 1672 r02 CAID: 1802
2010/12/04 12:50:03 1672 r02 Prv.ID: 00 00 8D 11 (sysid)
2010/12/04 12:50:03 1672 r02 [nagra-reader] ready for requests
2010/12/04 12:50:03 4536 s init for all local cards done
2010/12/04 12:50:03 4536 s anti cascading disabled

Il problema è che una volta completato questo caricamento con oscam loader, se provo ad aprire oscam.exe si apre una finestra scritta solo per un istante, ma poi si chiude (non si riesce a veder cosa c'è scritto).
poi come mai il log mi da CAID 1802?

[scaistar]

se oscamloader si ferma a quell'ultima riga

2010/12/04 12:50:03 4536 s init for all local cards done

sei apposto. perchè vuoi lanciare oscam.exe?
se premi ctrl+alt+canc dovresti già averne 3-4 in memoria.
Il problema è che la card è scaduta giusto?

i caid di M7 sono vari. 1803, 1804, 1805... e sono indipendenti dal riconoscimento della card.

prova anche una versione differente di oscam cygwin

[Gino81]

Pensavo di aver quasi risolto invece inserendo la tessera dell'abbonamento attivo ho questo log:


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Dec 4 16:47:06 2010
-------------------------------------------------------------------------------
2010/12/04 16:47:06 2696 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/04 16:47:06 2696 s max. clients=509, client max. idle=120 sec
2010/12/04 16:47:06 2696 s max. logsize=1000 Kb
2010/12/04 16:47:06 2696 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/04 16:47:06 2696 s shared memory initialized (size=4302198, fd=3)
2010/12/04 16:47:06 2696 s auth size=4756
2010/12/04 16:47:06 2696 s services reloaded: 0 services freed, 1 services loaded
2010/12/04 16:47:06 2696 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/04 16:47:06 2696 s signal handling initialized (type=sysv)
2010/12/04 16:47:06 2696 s 31 service-id's loaded
2010/12/04 16:47:06 2696 s 352 provid's loaded
2010/12/04 16:47:06 2696 s Cannot open oscam.version (errno=2)
2010/12/04 16:47:06 2696 s monitor: disabled
2010/12/04 16:47:06 2696 s camd 3.3x: disabled
2010/12/04 16:47:06 2696 s camd 3.5x: initialized (fd=7, port=20000)
2010/12/04 16:47:06 2696 s cs378x: disabled
2010/12/04 16:47:06 2696 s newcamd: initialized (fd=8, port=34001, crypted)
2010/12/04 16:47:06 2696 s CAID: 1805
2010/12/04 16:47:06 2696 s provid #0: 000000
2010/12/04 16:47:06 2696 s cccam: disabled
2010/12/04 16:47:06 2696 s radegast: disabled
2010/12/04 16:47:06 2696 s logger started (pid=4900)
2010/12/04 16:47:06 2696 s resolver thread started
2010/12/04 16:47:06 2696 s http started (pid=5108)
2010/12/04 16:47:06 2696 s reader started (pid=4340, device=/dev/ttyS7, detect=ring, mhz=500, cardmhz=368)
2010/12/04 16:47:06 2696 s waiting for local card init
2010/12/04 16:47:06 5108 h HTTP Server listening on port 8189
2010/12/04 16:47:09 4340 r02 card detected
2010/12/04 16:47:14 4340 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/04 16:47:16 4340 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2010/12/04 16:47:17 4340 r02 detect nagra tiger card
2010/12/04 16:47:17 4340 r02 card system not supported
2010/12/04 16:47:17 4340 r02 Normal mode failed, reverting to Deprecated Mode
2010/12/04 16:47:23 4340 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/04 16:47:24 4340 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2010/12/04 16:47:26 4340 r02 detect nagra tiger card
2010/12/04 16:47:32 4340 r02 card system not supported
2010/12/04 16:47:32 4340 r02 card initializing error
2010/12/04 16:47:33 2696 s init for all local cards done
2010/12/04 16:47:33 2696 s anti cascading disabled

la situazione è peggiorata...

[Gravanar]

Togli mhz e cardmhz da oscam server e prova a mettere il caid rilevato e se riesci liberati di oscam-loader usa oscam puro

[Gino81]

Togli mhz e cardmhz da oscam server e prova a mettere il caid rilevato e se riesci liberati di oscam-loader usa oscam puro

Allora, ho provato a togliere sia mhz che cardmhz.Il CAID della tessera attiva non riesce a leggerlo, si ferma all'ATR.Ho provato sia CAID 1802 che 1805 ma fa lo stesso.
se utlilizzo solo oscam.exe mi si apre una finestra piccola nera con il cursore lampeggiante.Se vedo in oscam.log, trovo un log uguale a quello che ti ho postato precedentemente cioè card system not supported

Ti ricapitolo un pò quello che ho fatto dall'inizio:
1)Ho scaricato i due pacchetti preimpostati per tivusat e infinity;
2)Oscam loader + oscam l'ho scompattato sul desktop, ACAMD invece nella cartella plugin di ProgDVB;
3)Avendo l'adatttore usb seriale, che mi rileva una porta COM 8, setto in oscam loader device =/dev/ttyS7, RING (ho provato anche CD) e provo i vari CAID 1802 e 1805

Facendo solo queste modifiche, se connetto oscam loader con la scheda scaduta, essa viene riconosciuta.
Se elimino cardmhz e mhz ed inserisco la tessera attiva non cambia nulla....

Se elimino totalmente oscam loader, il risultato è quello finestra con cursore lampeggiante.

però anche con la scheda scaduta mi da "Cannot open oscam.version (errno=2)"

[Gravanar]

La schermata nera con cursore e' normale, significa che oscam e' attivo e configurato correttamente (altrimenti la finestra scomparirebbe dopo decimi di secondo) ma a quanto pare ti riconosce la card ma non riesce a decriptarla, se e' un problema di configurazione interna la lettore dovresti vederlo con il porgrammino presente nella guida che effettua la lettura, relativamente ad oscam prova a postare i tre file di configurazione e ti ripeto, lascia perder oscam.loader, ora lavoriamo su oscam puro e poi si vedra'

[Gino81]

Allora dall'archivio OSCAM_LOADER_TIVUSAT, estraggo solo la cartella oscam e imposto i file nel modo seguente:

OSCAM.CONF

[global]
Nice =-20
WaitForCards =1
LogFile =oscam.log
maxlogsize = 1000

[newcamd]
key =0102030405060708091011121314
port =34001@1805:000000



[monitor]
Port = 0

[webif]
httpport = 8189
httpuser = scaistar
httppwd = scaistar
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[camd35]
port = 20000
suppresscmd08 = 1

#[cccam]
#port = 12000
#version = 2.0.11
#build = 1234
#reshare = 2

#[camd35]
#port = 30000
#suppresscmd08 = 1

#[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF

#[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255

#[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF

#[gbox]
#password = password1
#maxdist = 4
#cardinfos = card.infos
#ignorelist = ignore.list
#onlineinfos = online.infos
#locals = 01000000,02000000,0300FFFF

#[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300

OSCAM.SERVER



OSCAM.USER

[account]
user = scaistar
pwd = scaistar
group = 1
au = 1
caid = 1805
ident = 1805:000000



lancio oscam.exe e questo è il risultato:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Dec 5 14:22:22 2010
-------------------------------------------------------------------------------
2010/12/05 14:22:22 3416 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/05 14:22:22 3416 s max. clients=509, client max. idle=120 sec
2010/12/05 14:22:22 3416 s max. logsize=1000 Kb
2010/12/05 14:22:22 3416 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/05 14:22:22 3416 s shared memory initialized (size=4302198, fd=3)
2010/12/05 14:22:22 3416 s auth size=4756
2010/12/05 14:22:22 3416 s services reloaded: 0 services freed, 1 services loaded
2010/12/05 14:22:22 3416 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/05 14:22:22 3416 s signal handling initialized (type=sysv)
2010/12/05 14:22:22 3416 s 31 service-id's loaded
2010/12/05 14:22:22 3416 s 352 provid's loaded
2010/12/05 14:22:22 3416 s Cannot open oscam.version (errno=2)
2010/12/05 14:22:22 3416 s monitor: disabled
2010/12/05 14:22:22 3416 s camd 3.3x: disabled
2010/12/05 14:22:22 3416 s camd 3.5x: initialized (fd=7, port=20000)
2010/12/05 14:22:22 3416 s cs378x: disabled
2010/12/05 14:22:22 3416 s newcamd: initialized (fd=8, port=34001, crypted)
2010/12/05 14:22:22 3416 s CAID: 1805
2010/12/05 14:22:22 3416 s provid #0: 000000
2010/12/05 14:22:22 3416 s cccam: disabled
2010/12/05 14:22:22 3416 s radegast: disabled
2010/12/05 14:22:22 3416 s logger started (pid=1900)
2010/12/05 14:22:22 3416 s resolver thread started
2010/12/05 14:22:22 3416 s http started (pid=4812)
2010/12/05 14:22:23 3416 s reader started (pid=2896, device=/dev/ttyS7, detect=ring, mhz=357, cardmhz=357)
2010/12/05 14:22:23 3416 s waiting for local card init
2010/12/05 14:22:23 4812 h HTTP Server listening on port 8189
2010/12/05 14:22:25 2896 r02 card detected
2010/12/05 14:22:31 2896 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 14:22:32 2896 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 14:22:33 2896 r02 detect nagra tiger card
2010/12/05 14:22:33 2896 r02 card system not supported
2010/12/05 14:22:33 2896 r02 Normal mode failed, reverting to Deprecated Mode
2010/12/05 14:22:39 2896 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 14:22:40 2896 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 14:22:42 2896 r02 detect nagra tiger card
2010/12/05 14:22:49 2896 r02 card system not supported
2010/12/05 14:22:49 2896 r02 card initializing error
2010/12/05 14:22:50 3416 s init for all local cards done
2010/12/05 14:22:50 3416 s anti cascading disabled
2010/12/05 14:22:52 3416 s exit with signal 1

[Gravanar]

L'unica cosa che non va bene (ci sono altre cosettine da correggere ma non pregiudicano la funzionalita') e' l'ident, che non e' 1805:000000 ma 1805:008d11, prova anche a cambiare il caid e l'ident mettendo 1803:008c11, ma sinceramente non sono sicuro che cio' ti possa far funzionare il tutto.

[Gino81]

cambiando l'ident la situazione resta uguale, cambiando 1805 con 1803 ho questo log:

>> OSCam << cardserver started at Sun Dec 5 14:41:43 2010
-------------------------------------------------------------------------------
2010/12/05 14:41:43 2168 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/05 14:41:43 2168 s max. clients=509, client max. idle=120 sec
2010/12/05 14:41:43 2168 s max. logsize=1000 Kb
2010/12/05 14:41:43 2168 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/05 14:41:43 2168 s shared memory initialized (size=4302198, fd=3)
2010/12/05 14:41:43 2168 s auth size=4756
2010/12/05 14:41:43 2168 s services reloaded: 0 services freed, 1 services loaded
2010/12/05 14:41:43 2168 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/05 14:41:43 2168 s signal handling initialized (type=sysv)
2010/12/05 14:41:43 2168 s 31 service-id's loaded
2010/12/05 14:41:43 2168 s 352 provid's loaded
2010/12/05 14:41:43 2168 s Cannot open oscam.version (errno=2)
2010/12/05 14:41:43 2168 s monitor: disabled
2010/12/05 14:41:43 2168 s camd 3.3x: disabled
2010/12/05 14:41:43 2168 s camd 3.5x: initialized (fd=7, port=20000)
2010/12/05 14:41:43 2168 s cs378x: disabled
2010/12/05 14:41:43 2168 s newcamd: initialized (fd=8, port=34001, crypted)
2010/12/05 14:41:43 2168 s CAID: 1803
2010/12/05 14:41:43 2168 s provid #0: 008D11
2010/12/05 14:41:43 2168 s cccam: disabled
2010/12/05 14:41:43 2168 s radegast: disabled
2010/12/05 14:41:43 2168 s logger started (pid=4116)
2010/12/05 14:41:43 2168 s resolver thread started
2010/12/05 14:41:43 2168 s http started (pid=1188)
2010/12/05 14:41:43 2168 s reader started (pid=4748, device=/dev/ttyS7, detect=ring, mhz=357, cardmhz=357)
2010/12/05 14:41:43 2168 s waiting for local card init
2010/12/05 14:41:43 1188 h HTTP Server listening on port 8189
2010/12/05 14:41:46 4748 r02 card detected
2010/12/05 14:41:51 4748 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 14:41:52 4748 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 14:41:53 4748 r02 detect nagra tiger card
2010/12/05 14:41:54 4748 r02 card system not supported
2010/12/05 14:41:54 4748 r02 Normal mode failed, reverting to Deprecated Mode
2010/12/05 14:42:00 4748 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 14:42:01 4748 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 14:42:03 4748 r02 detect nagra tiger card
2010/12/05 14:42:09 4748 r02 card system not supported
2010/12/05 14:42:09 4748 r02 card initializing error
2010/12/05 14:42:10 2168 s init for all local cards done
2010/12/05 14:42:10 2168 s anti cascading disabled
2010/12/05 14:42:17 2168 s exit with signal 1
2010/12/05 14:42:17 2168 s cannot remove /tmp/oscam.version errno=(2)
2010/12/05 14:42:17 2168 s cardserver down

[Gravanar]

Vedo che attivi anche la camd35, disattiva tutto tranne newcamd lascia solo queste righe:

OSCAM.CONF

[global]
Nice =-1
WaitForCards =1
LogFile =oscam.log
maxlogsize = 1000

[newcamd]
key =0102030405060708091011121314
port =34001@1805:008d11

OSCAM.SERVER

[reader]
label=INFINITY
protocol=mouse
detect=CD
device=/dev/ttyS7
group=1
caid=1805
EMMCache = 1,1,2
tiger_rsakey = quella gia' presente


OSCAM.USER

[account]
user = scaistar
pwd = scaistar
group = 1
au = 1
caid = 1805
ident = 1805:008d11

[Gino81]

Provato.....ma questo è il log.Se metto CD non legge neanche l'ATR, quindi ho messo RING:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Dec 5 16:19:32 2010
-------------------------------------------------------------------------------
2010/12/05 16:19:32 3628 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2010/12/05 16:19:32 3628 s max. clients=509, client max. idle=120 sec
2010/12/05 16:19:32 3628 s max. logsize=1000 Kb
2010/12/05 16:19:32 3628 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/12/05 16:19:32 3628 s shared memory initialized (size=4302198, fd=3)
2010/12/05 16:19:32 3628 s auth size=4756
2010/12/05 16:19:32 3628 s services reloaded: 0 services freed, 1 services loaded
2010/12/05 16:19:32 3628 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/12/05 16:19:32 3628 s signal handling initialized (type=sysv)
2010/12/05 16:19:32 3628 s 31 service-id's loaded
2010/12/05 16:19:32 3628 s 352 provid's loaded
2010/12/05 16:19:32 3628 s Cannot open oscam.version (errno=2)
2010/12/05 16:19:32 3628 s monitor: disabled
2010/12/05 16:19:32 3628 s camd 3.3x: disabled
2010/12/05 16:19:32 3628 s camd 3.5x: disabled
2010/12/05 16:19:32 3628 s cs378x: disabled
2010/12/05 16:19:32 3628 s newcamd: initialized (fd=7, port=34001, crypted)
2010/12/05 16:19:32 3628 s CAID: 1805
2010/12/05 16:19:32 3628 s provid #0: 008D11
2010/12/05 16:19:32 3628 s cccam: disabled
2010/12/05 16:19:32 3628 s radegast: disabled
2010/12/05 16:19:32 3628 s logger started (pid=4888)
2010/12/05 16:19:32 3628 s resolver thread started
2010/12/05 16:19:32 3628 s http started (pid=3584)
2010/12/05 16:19:32 3628 s reader started (pid=3416, device=/dev/ttyS7, detect=ring, mhz=357, cardmhz=357)
2010/12/05 16:19:32 3628 s waiting for local card init
2010/12/05 16:19:32 3584 h HTTP Server listening on port 0
2010/12/05 16:19:35 3416 r02 card detected
2010/12/05 16:19:40 3416 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 16:19:41 3416 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 16:19:42 3416 r02 detect nagra tiger card
2010/12/05 16:19:42 3416 r02 card system not supported
2010/12/05 16:19:42 3416 r02 Normal mode failed, reverting to Deprecated Mode
2010/12/05 16:19:48 3416 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2010/12/05 16:19:49 3416 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/12/05 16:19:51 3416 r02 detect nagra tiger card
2010/12/05 16:19:58 3416 r02 card system not supported
2010/12/05 16:19:58 3416 r02 card initializing error
2010/12/05 16:19:58 3628 s init for all local cards done
2010/12/05 16:19:58 3628 s anti cascading disabled
2010/12/05 16:20:05 3628 s exit with signal 1
2010/12/05 16:20:05 3628 s cannot remove /tmp/oscam.version errno=(2)
2010/12/05 16:20:05 3628 s cardserver down