da raffy » mer gen 16, 2013 11:53 am
Ho apportato le due modifiche
Quell WARNING: invalid client compare nell’esatto istante in cuio chiudo ProgDVB e quindi ACamd
1) Qundo avvio oscam il log si ferma a questo punto:
2013/01/16 12:03:39 60F658 r tivu [nagra] ready for requests
2013/01/16 12:03:40 0 s init for all local cards done
2013/01/16 12:03:40 0 s anti cascading disabled
2) Poi quando avvio ProDVB si aggiungono queste righe:
2013/01/16 12:03:40 0 s anti cascading disabled
2013/01/16 12:03:55 619D50 c client connected to 34001 port
2013/01/16 12:03:56 619D50 c encrypted newcamd:34001-client 127.0.0.1 granted (tivu, au=auto (1 reader))
2013/01/16 12:03:56 619D50 c user tivu authenticated successfully (ACamd)
2013/01/16 12:03:56 619D50 c AU enabled for user tivu on reader tivu
3)Poi qundo chiudo ProgDVB si aggiungono altr due righe:
2013/01/16 12:03:56 619D50 c AU enabled for user tivu on reader tivu
2013/01/16 12:04:27 619D50 c WARNING: invalid client
2013/01/16 12:04:27 619D50 c tivu disconnected from 127.0.0.1
Il problema è che Oscam e ACamd non colloquiano correttamente
Lo stesso ProgDVB con il vcchio pacchetto di Oscam non da alcun problema e si vedono i nanali
Ne dobrebbe conseguire che il problema sia su oscam
Questa è la riga di cardclient.conf
newcamd:localhost:34001:1/183D/FFFF:tivu:tivu:0102030405060708091011121314
Questo è il log di ACamd
12:03:54.031: ACamd v0.6.2.0
12:03:54.062: MD-API Version 01.02 - 1.06
12:03:54.078: systems: registering CA system Cardclient, pri -15, ident 1000
12:03:54.078: structloaders: registering loader cardclient config
12:03:54.078: cardclients: registering cardclient Newcamd
12:03:54.078: cardclients: registering cardclient Newcamd2
12:03:54.078: cardclients: registering cardclient CCcamN
12:03:54.078: cardclients: registering cardclient Radegast
12:03:54.078: cardclients: registering cardclient Camd35
12:03:54.078: structloaders: registering loader smartcard data
12:03:54.078: systems: registering CA system SC-Irdeto, pri -10, ident 1001
12:03:54.078: feature: using feature SMARTCARD
12:03:54.078: registering Irdeto smartcard (id 49726474)
12:03:54.078: systems: registering CA system SC-Seca, pri -10, ident 1002
12:03:54.078: registering Seca smartcard (id 53656361)
12:03:54.078: systems: registering CA system SC-Viaccess, pri -10, ident 1003
12:03:54.078: registering Viaccess smartcard (id 56696173)
12:03:54.078: systems: registering CA system SC-Conax, pri -10, ident 1004
12:03:54.078: registering Conax smartcard (id 436f6e78)
12:03:54.078: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
12:03:54.078: registering Cryptoworks smartcard (id 4372576f)
12:03:54.078: systems: registering CA system SC-Nagra, pri -10, ident 1006
12:03:54.078: registering Nagra smartcard (id 4e616772)
12:03:54.078: systems: registering CA system SC-NDS, pri -10, ident 1007
12:03:54.078: registering NDS smartcard (id 56694732)
12:03:54.109: Monitor listen on port 1227
12:03:54.140: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
12:03:54.140: Engine [MD-API]
12:03:54.140: loading smartcard data from C:\Documents and Settings\Raf\Desktop\Copia di Copia ProgDVB\Plugins\smartcard.conf
12:03:54.140: loaded 5 smartcard data from C:\Documents and Settings\Raf\Desktop\Copia di Copia ProgDVB\Plugins\smartcard.conf
12:03:54.140: loading cardclient config from C:\Documents and Settings\Raf\Desktop\Copia di Copia ProgDVB\Plugins\cardclient.conf
12:03:54.140: now using protocol version 525 (cdLen=8)
12:03:54.140: hostname=localhost port=34001 emm=1 emmCaids 183d/ffff
12:03:54.140: Newcamd: username=tivu password=tivu key=0102030405060708091011121314 providers=none
12:03:54.140: client 'Newcamd' ready
12:03:54.140: ** registered systems:
12:03:54.140: ** SC-NDS (pri -10)
12:03:54.140: ** SC-Nagra (pri -10)
12:03:54.140: ** SC-Cryptoworks (pri -10)
12:03:54.140: ** SC-Conax (pri -10)
12:03:54.140: ** SC-Viaccess (pri -10)
12:03:54.140: ** SC-Seca (pri -10)
12:03:54.140: ** SC-Irdeto (pri -10)
12:03:54.140: ** Cardclient (pri -15)
12:03:54.140: COM2: open serial port
12:03:54.140: COM2: open failed: No error
12:03:54.140: failed to open serial port COM2
12:03:54.140: COM2: shutting down
12:03:54.140: COM2: shutdown done
12:03:54.140: ANYSEE0: open serial port
12:03:54.140: Anysee Version: 3145728
12:03:54.171: Anysee Number Of Devices: 0
12:03:54.171: failed to open serial port ANYSEE0
12:03:54.171: ANYSEE1: open serial port
12:03:54.171: Anysee Version: 3145728
12:03:54.187: Anysee Number Of Devices: 0
12:03:54.187: failed to open serial port ANYSEE1
12:03:54.187: ANYSEE2: open serial port
12:03:54.187: Anysee Version: 3145728
12:03:54.187: Anysee Number Of Devices: 0
12:03:54.203: failed to open serial port ANYSEE2
12:03:54.203: ANYSEE3: open serial port
12:03:54.203: Anysee Version: 3145728
12:03:54.203: Anysee Number Of Devices: 0
12:03:54.203: failed to open serial port ANYSEE3
12:03:54.203: no smartcard interface defined!
12:03:54.203:
Blocked 1 same messages...
12:03:55.718: Ch: 136 - Rai 4
12:03:55.718: Programm crc: 6F8A1CBB
12:03:55.734: PMT: ACamd_PMT.txt, search, not found PMT=0088 (AND SID=2142)
12:03:55.734: PMT: chcache.ini, 0088,2142,183D,00000000,1046,0137,Rai 4
12:03:55.734: 0x0088 0x2142 0x183D 0x00000000 0x1046 0x0137 11111110
12:03:55.796: Incomming PackageSize [184]
12:03:55.828: Login attemp (1)
12:03:55.828: connecting to localhost:34001/tcp (127.0.0.1)
12:03:56.468: Newcamd 0: CaID=183d admin=1 srvUA=00000000412009AC provider 005411/0000000041200000 <unhandled>
12:03:56.468: Newcamd 0: ECM [1046][183D/00000000] Pro (0.000)
12:03:56.468: Newcamd 0: ECM [1046][183D/00000000] not able to decode
12:03:56.500: Newcamd 0: ECM [1046][183D/00000000] Pro (0.000)
12:03:56.500: Newcamd 0: ECM [1046][183D/00000000] not able to decode
12:04:11.937: Newcamd 0: ECM [1046][183D/00000000] Pro (0.000)
12:04:11.937: Newcamd 0: ECM [1046][183D/00000000] not able to