HELP con configurazione x visione di sky su pc con infinity

[Gravanar]

Che lettore utilizzi? Se usi l'Infinity prova con un altro modulo (il betaid25 a 3,58 per esempio) togli da oscam.server cardmhz=368 e mhz=500 nel frattempo.

[scaistar]

i moduli #11 e #7 funzionano entrambi

[dragonfly16]

utilizzo l'infinity come programmatore scusa ma mi ero dimenticato di postarlo.

Ho provato a togliere cardmhz e mhz ma mi da sempre lo stesso errore.

una info...ma acad lo devo attivare prima di oscam o dopo??

[scaistar]

una info...ma acad lo devo attivare prima di oscam o dopo??

è ininfluente. ma meglio dopo

[Gravanar]

A questo punto penso che il problema sia il modulo, come ti hanno gia' consigliato usa il numero 7 o il numero 11.

[dragonfly16]

Ho provato sia con modulo 7 che con modulo 11 e ora mi appare questo.
Non mi da ready...va bene lostesso.....
Con Acamd poi non so come comportarmi....ho messo nella tendina centrale newcamd login attempted.......va bene o sbaglio qualcosa...
ho configurato il file cardclient.conf ma con dvbviewer2 vedo tutto nero....

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Sep 15 23:10:56 2010
-------------------------------------------------------------------------------
2010/09/15 23:10:56 4936 s version=0.99.4svn, build #2978, system=i386-pc-cygwin, nice=-20
2010/09/15 23:10:56 4936 s max. clients=509, client max. idle=120 sec
2010/09/15 23:10:56 4936 s max. logsize=1000 Kb
2010/09/15 23:10:56 4936 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/09/15 23:10:56 4936 s shared memory initialized (size=4335862, fd=3)
2010/09/15 23:10:56 4936 s auth size=4772
2010/09/15 23:10:56 4936 s services reloaded: 0 services freed, 1 services loaded
2010/09/15 23:10:56 4936 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/09/15 23:10:56 4936 s signal handling initialized (type=sysv)
2010/09/15 23:10:56 4936 s 31 service-id's loaded
2010/09/15 23:10:56 4936 s 38 tier-id's loaded
2010/09/15 23:10:56 4936 s 352 provid's loaded
2010/09/15 23:10:56 4936 s monitor: disabled
2010/09/15 23:10:56 4936 s camd 3.3x: disabled
2010/09/15 23:10:56 4936 s camd 3.5x: initialized (fd=7, port=20000)
2010/09/15 23:10:56 4936 s cs378x: disabled
2010/09/15 23:10:56 4936 s newcamd: initialized (fd=8, port=34001, crypted)
2010/09/15 23:10:56 4936 s CAID: 093B
2010/09/15 23:10:56 4936 s provid #0: 000000
2010/09/15 23:10:56 4936 s cccam: disabled
2010/09/15 23:10:56 4936 s radegast: disabled
2010/09/15 23:10:56 4936 s logger started (pid=3448)
2010/09/15 23:10:56 4936 s Resolver thread started
2010/09/15 23:10:56 4936 s http started (pid=2552)
2010/09/15 23:10:56 2552 h HTTP Server listening on port 8189
2010/09/15 23:10:56 4936 s reader started (pid=4220, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2010/09/15 23:10:56 4936 s waiting for local card init
2010/09/15 23:10:59 4220 r02 card detected

2010/09/15 23:11:04 4220 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/09/15 23:11:05 4220 r02 [videoguard2-reader] type: VideoGuard Sky Italia (093B)
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] type: VideoGuard, caid: 093B, serial: 0134xxxx, BoxID: 00xxxxx
2010/09/15 23:11:08 4220 r02 [videoguardx2-reader] ready for requests
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] card detected
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] type: VideoGuard
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] tier: 000b, expiry date: 2010/10/28-00:00:00 Service
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] tier: 0219, expiry date: 2010/10/26-00:00:00 Mondo HD
2010/09/15 23:11:08 4220 r02 [videoguard2-reader] tier: 021a, expiry date: 2010/10/26-00:00:00 Cinema HD
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 021b, expiry date: 2010/10/26-00:00:00 Cinema
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 022e, expiry date: 2010/10/26-00:00:00 Music & News
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 029a, expiry date: 2010/10/26-00:00:00 Gest. coll. telef.
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 029b, expiry date: 2010/10/26-00:00:00 Intrattenimento
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 029c, expiry date: 2010/10/26-00:00:00 Documentari
2010/09/15 23:11:09 4220 r02 [videoguard2-reader] tier: 029d, expiry date: 2010/10/26-00:00:00 Bambini
2010/09/15 23:11:10 4220 r02 [videoguard2-reader] tier: 029f, expiry date: 2010/10/26-00:00:00 News
2010/09/15 23:11:10 4220 r02 [videoguard2-reader] tier: 02aa, expiry date: 2010/10/26-00:00:00 Skystar
2010/09/15 23:11:10 4220 r02 [videoguard2-reader] tier: 02fe, expiry date: 2010/10/26-00:00:00 PPV
2010/09/15 23:11:10 4936 s init for all local cards done
2010/09/15 23:11:10 4936 s anti cascading disabled


Scusami se rompo ma potresti gentilmente aiutarmi...non ci capisco molto....

[scaistar]

il log sembra perfetto. ora si tratta di avviare acamd e collegarlo a oscam.
devi avere questa in cardclient.conf (metti tuo user e pass)

newcamd:localhost:34001:1/093B/FFFF:scaistar:scaistar:0102030405060708091011121314

[dragonfly16]

ho provato ma mi resta tutto nero......

[Gravanar]

Prova a postare il log di oscam dopo le modifiche e i tuoi file di configurazione

[dragonfly16]

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Sep 16 20:43:08 2010
-------------------------------------------------------------------------------
2010/09/16 20:43:08 2360 s version=0.99.4svn, build #2978, system=i386-pc-cygwin, nice=-20
2010/09/16 20:43:08 2360 s max. clients=509, client max. idle=120 sec
2010/09/16 20:43:08 2360 s max. logsize=1000 Kb
2010/09/16 20:43:08 2360 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/09/16 20:43:08 2360 s shared memory initialized (size=4335862, fd=3)
2010/09/16 20:43:08 2360 s auth size=4772
2010/09/16 20:43:08 2360 s services reloaded: 0 services freed, 1 services loaded
2010/09/16 20:43:08 2360 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/09/16 20:43:08 2360 s signal handling initialized (type=sysv)
2010/09/16 20:43:08 2360 s 31 service-id's loaded
2010/09/16 20:43:08 2360 s 38 tier-id's loaded
2010/09/16 20:43:08 2360 s 352 provid's loaded
2010/09/16 20:43:08 2360 s monitor: disabled
2010/09/16 20:43:08 2360 s camd 3.3x: disabled
2010/09/16 20:43:08 2360 s camd 3.5x: initialized (fd=7, port=20000)
2010/09/16 20:43:08 2360 s cs378x: disabled
2010/09/16 20:43:08 2360 s newcamd: initialized (fd=8, port=34001, crypted)
2010/09/16 20:43:08 2360 s CAID: 093B
2010/09/16 20:43:08 2360 s provid #0: 000000
2010/09/16 20:43:08 2360 s cccam: disabled
2010/09/16 20:43:08 2360 s radegast: disabled
2010/09/16 20:43:08 2360 s logger started (pid=896)
2010/09/16 20:43:08 2360 s Resolver thread started
2010/09/16 20:43:08 2360 s http started (pid=2916)
2010/09/16 20:43:08 2916 h HTTP Server listening on port 8189
2010/09/16 20:43:08 2360 s reader started (pid=1612, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2010/09/16 20:43:08 2360 s waiting for local card init
2010/09/16 20:43:10 1612 r02 card detected
2010/09/16 20:43:14 1612 r02 ATR: 3F FD 13 25 02 50 80 0F 33 B0 13 69 FF 4A 50 D0 80 00 49 54 03
2010/09/16 20:43:15 1612 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/09/16 20:43:16 1612 r02 [videoguard2-reader] type: VideoGuard Sky Italia (093B)
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] type: VideoGuard, caid: 093B, serial: 0134B9B8, BoxID: 125904D7
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] ready for requests
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] card detected
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] type: VideoGuard
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] tier: 000b, expiry date: 2010/10/28-00:00:00 Service
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] tier: 0219, expiry date: 2010/10/26-00:00:00 Mondo HD
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] tier: 021a, expiry date: 2010/10/26-00:00:00 Cinema HD
2010/09/16 20:43:20 1612 r02 [videoguard2-reader] tier: 021b, expiry date: 2010/10/26-00:00:00 Cinema
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 022e, expiry date: 2010/10/26-00:00:00 Music & News
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 029a, expiry date: 2010/10/26-00:00:00 Gest. coll. telef.
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 029b, expiry date: 2010/10/26-00:00:00 Intrattenimento
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 029c, expiry date: 2010/10/26-00:00:00 Documentari
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 029d, expiry date: 2010/10/26-00:00:00 Bambini
2010/09/16 20:43:21 1612 r02 [videoguard2-reader] tier: 029f, expiry date: 2010/10/26-00:00:00 News
2010/09/16 20:43:22 1612 r02 [videoguard2-reader] tier: 02aa, expiry date: 2010/10/26-00:00:00 Skystar
2010/09/16 20:43:22 1612 r02 [videoguard2-reader] tier: 02fe, expiry date: 2010/10/26-00:00:00 PPV
2010/09/16 20:43:22 2360 s init for all local cards done
2010/09/16 20:43:22 2360 s anti cascading disabled
-------------------------------------------------------------------------------
>> OSCam << disconnected
-------------------------------------------------------------------------------

[Gravanar]

Ok, oscam pare leggere la card correttamente, non compare nessuna riga con l'indirizzo Ip del computer su cui c'e' ACAMD quindi il problema e' che acamd non si collega, hai inserito la riga postata da Scaistar per il cardclient.conf?

[dragonfly16]

si e l'ho inserita insieme ad acamd nella cartella plugin di dvbwiever ma poi nn vedo nulla forse sbaglio a configurare acamd

[Gravanar]

ACAMD cosa scrive nel log?

[dragonfly16]

non mi esce nulla.....io metto newcamd login attempt nella seconda casella e poi qualsiasi tasto premo non succede nulla.

[Gravanar]

Aspetta, non ti seguo, non e' che stai cercando di usare ACAMD come cardserver? Devi cancellare il file ACAMD.ini, inserire la riga postata da Scaistar in cardclient.conf (e lasciare SOLO quella), configurare oscam.user con le stesse credenziali e basta.