Giusto per completezza, vediamo se ho capito bene, e può tornare utile anche ad altri:
ACAMD è un
client NewCS (come WinCSC ed Emunation), tra l'altro tra i più consigliati nel forum.
Non ho ben capito perchè dalle opzioni dà la possibilità di settare la COM, come se fosse un
plugin "all-in-one" (non sò come definirlo) stile
NCEmucam o
NDSCam.
Non è compatibile con NDS forse? (perchè nel Readme parla di compatibilità con NDS)
Procedimento:
Quindi ammettiamo di avere un server NewsCS perfettamente avviato (seguendo la guida di LEmonsat postata
qui)
● Scarico lo zip, e lo estraggo
● Edito il
file cardclient.conf come avevi scritto in un
altro post (le differenze sono solo nella selezione del
caid):
# Per chi ha scheda NDS3 (002)
newcamd:localhost:15050:1/093B/ffff:dummy:dummy:0102030405060708091011121314
# Per chi ha sceda NDS2 (001)
newcamd:localhost:15050:1/0919/ffff:dummy:dummy:0102030405060708091011121314
● A questo punto ho nella cartella dei plugins di DVBDream (o del proprio software DVB):
ACamd.dllcardclient.conf -> Che ho editato con le informazioni del newscamd serverACamd_PMT.txt -> Non devo mettere nessuna informazione? Serve solamente nel caso di da smartmouse non da client newscamd?smartcard.conf -> Idem come sopra● E in teoria tutto dovrebbe funzionare.
Problemi da me riscontrati:Cosi come settato avendo server NewsCS 1.30 avviato e pronto:
Reading Config file from newcs.xml
NewCS is trying to bind to IP: 127.0.0.1
TCP-log password is enabled, set to: NewCSpwd
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
tcp port: 1001
TCP log options: level 1 type 3
[ 13:18:56 ] [ Box detect ] Windows XP Build 2600
[ 13:18:56 ] [ Config ] COM1 ECM priority: round
[ 13:18:56 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 13:18:56 ] [ ECM Cache ] Initialising Cache with 20 entries
[ 13:18:56 ] [ Loader ] Reader type 2 on node COM1
[ 13:18:56 ] [ Phoenix ] Opening device COM1
[ 13:18:56 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 13:18:56 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 13:18:56 ] [ Phoenix ] Setting baud to 9600
[ 13:18:58 ] [ ATR ] T=0 1etu=25.23us Guardtime:15etu WWT:38400etu
[ 13:18:58 ] [ ATR ] Historical bytes: 3 [B0] [0E] i [FF] J P p [00] [00] I T [02] [00] [00]
[ 13:18:58 ] [ Loader ] Init NDS card
[ 13:18:58 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 13:18:58 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 13:18:58 ] [ Phoenix ] Setting baud to 38400
[ 13:18:59 ] [ Keyman ] Adding key 9XCXXX type 0 on Provider 000000 for caid 0000 ID=2XXX
[ 13:18:59 ] [ Keyman ] Adding key 9XCXXX type 0 on Provider 000001 for caid 0000 ID=2XXX
[ 13:18:59 ] [ Loader ] Card 0919 on port COM1 ready
[ 13:18:59 ] [ Loader ] Starting Newcamd Server on port 15050
Lancio il mio client DVB (in questo caso DVBDream 1.4i) e ho buio, ecco che dice
ACamd:
13:20:26.687: structloaders: registering loader keys
13:20:26.687: cardclients: registering cardclient Camd35
13:20:26.687: systems: registering CA system Cardclient, pri -15, ident 1000
13:20:26.687: structloaders: registering loader cardclient config
13:20:26.687: cardclients: registering cardclient EmuBox03
13:20:26.687: cardclients: registering cardclient Gbox
13:20:26.687: cardclients: registering cardclient GboxN
13:20:26.687: cardclients: registering cardclient MboxN
13:20:26.687: cardclients: registering cardclient Newcamd
13:20:26.687: cardclients: registering cardclient Radegast
13:20:26.687: systems: registering CA system SC-Irdeto, pri -10, ident 1001
13:20:26.687: feature: using feature SMARTCARD
13:20:26.687: registering Irdeto smartcard (id 49726474)
13:20:26.687: systems: registering CA system SC-Seca, pri -10, ident 1002
13:20:26.687: registering Seca smartcard (id 53656361)
13:20:26.687: systems: registering CA system SC-Viaccess, pri -10, ident 1003
13:20:26.687: registering Viaccess smartcard (id 56696173)
13:20:26.687: systems: registering CA system SC-Conax, pri -10, ident 1004
13:20:26.687: registering Conax smartcard (id 436f6e78)
13:20:26.687: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
13:20:26.687: registering Cryptoworks smartcard (id 4372576f)
13:20:26.687: systems: registering CA system SC-Nagra, pri -10, ident 1006
13:20:26.687: registering Nagra smartcard (id 4e616772)
13:20:26.687: systems: registering CA system SC-NDS, pri -10, ident 1007
13:20:26.687: registering NDS smartcard (id 56694732)
13:20:26.687: ACamd v0.6.0.3
13:20:26.687: structloaders: registering loader smartcard data
13:20:26.718: Engine MD-API
13:20:26.718: loading smartcard data from D:\Programmi\dvbdream\Plugins\pip00\smartcard.conf
13:20:26.718: loaded 9 smartcard data from D:\Programmi\dvbdream\Plugins\pip00\smartcard.conf
13:20:26.718: loading cardclient config from D:\Programmi\dvbdream\Plugins\pip00\cardclient.conf
13:20:26.718: now using protocol version 525 (cdLen=8)
13:20:26.718: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0919/ffff
13:20:26.718: Newcamd: username=lol password=lol key=0102030405060708091011121314 providers=none
13:20:26.718: client 'Newcamd' ready
13:20:26.718: ** registered systems:
13:20:26.718: ** SC-NDS (pri -10)
13:20:26.718: ** SC-Nagra (pri -10)
13:20:26.718: ** SC-Cryptoworks (pri -10)
13:20:26.718: ** SC-Conax (pri -10)
13:20:26.718: ** SC-Viaccess (pri -10)
13:20:26.718: ** SC-Seca (pri -10)
13:20:26.718: ** SC-Irdeto (pri -10)
13:20:26.718: ** Cardclient (pri -15)
13:20:26.718: no smartcard interface defined!
13:20:26.718:
13:20:26.718: Ch: 1008 - PATIO TV
13:20:26.718: Programm crc: 0A96AEB5
13:20:26.718: PMT: ACamd_PMT.txt, search, not found PMT=03F0 (AND SID=1138)
13:20:28.750:
13:20:28.750: Ch: 263 - Fox Life
13:20:28.750: Programm crc: 5A5FE6EB
13:20:28.750: PMT: ACamd_PMT.txt, search, not found PMT=0107 (AND SID=1FC5)
13:20:31.484:
13:20:31.484: Ch: 263 - Fox Life
13:20:31.484: Programm crc: 5A5FE6EB
13:20:31.484: PMT: ACamd_PMT.txt, search, not found PMT=0107 (AND SID=1FC5)
13:20:31.656: Incomming PackageSize [184]
13:20:31.796: Auto search..., not found...
13:20:31.796: 0x0107 0x1FC5 0x0919 0x00000000 0x050C 0x0A1A 11111010
13:20:31.843: Login attemp (1)
13:20:31.843: netwatch up
13:20:31.843: Netwatcher thread started (tid=68605168)
13:20:31.843: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
13:20:39.781: socket: select timed out (7 secs)
13:20:39.781: recv error. reconnecting...
13:20:39.781: netwatch down
Mentre in
NewCS ho:
[ 13:20:32 ] [ Newcamd:15050 ] User lol logged in, client: Generic
[ 13:20:39 ] [ Newcamd:15050 ] User lol logout
Se
chiudo e riapro DVBDream ho (da
ACamd):
...
14:20:39.328: Login attemp (1)
14:20:39.328: netwatch up
14:20:39.328: Netwatcher thread started (tid=68606064)
14:20:39.328: connecting to 127.0.0.1:15000/tcp (127.0.0.1)
14:20:40.265: Newcamd 0: CaID=0919 admin=1 srvUA=0000000000XCXXX provider 000000/0000000000XCXXX0
14:20:40.671: Newcamd 0: ECM [050A][0919/00000000] Pro (0.407)
14:20:40.828: [00] SendDCW Odd: :5CD7DE11BD1D1FF9
14:20:42.156: Newcamd 0: EMM [09B3][0919/00000000] Pro, [00] (0.000)
...
E ancora una volta
NewsCS:
[ 14:20:40 ] [ Newcamd:15000 ] User dummy logged in, client: Generic
[ 14:20:40 ] [ Newcamd ] ECM -> dummy (OK)
[ 14:20:49 ] [ Newcamd ] ECM -> dummy (OK)
[ 14:20:59 ] [ Newcamd ] ECM -> dummy (OK)
E tutto dopo sembra funzionare, la cosa è un pò inquietante
in quanto io non ho modificato nulla e ha funzionato, quindi può essere che vado per registrare un giorno e di nuovo mi dà quell'errore (per il momento non lo sta dando).
Opzioni e cosa effettivamente fanno:
Vediamo se si riesce a capire cosa l'utilità di tutte le funzioni e e effettivamente alcune modifiche possono influire positivamente o negativamente sulle prestazioni del Client.
Io per il momento ho capito solamente:
(A): Attivare il filtro
(B): Apertura del monitor all'avvio del programma DVB
(R): Disabilita la visualizzazione dei log a monitor
(S): Logga quello visualizzato a monitor nel file ACamd_log.txt
(U): Visualizza una trayicon in basso a destra quando il filtro è avviato
Il resto è nebbia
Quancuno sa darmi una mano a colmare questi dubbi? Poi sistemo bene i post in maniera da creare una specie di FAQ