problema newcs

[krosta]

è normale che dopo un po di funzionamento newcs (1.50) reinizzializzi la card? questa cosa mi provoca purtroppo il blocco del video e mi obbliga a chiudere dvbviewer e riaprirlo per poter di nuovo vedere.
questo è il log di newcs

[ 13:14:54 ] [ Newcamd ] ECM -> dummy (OK)
[ 13:15:04 ] [ Newcamd ] ECM -> dummy (OK)
[ 13:15:14 ] [ Newcamd ] ECM -> dummy (OK)
[ 13:15:24 ] [ Newcamd ] ECM -> dummy (OK)
[ 13:15:34 ] [ Newcamd ] ECM -> dummy (OK)
[ 13:15:45 ] [ Loader ] Reinit card with caid 0500
[ 13:15:45 ] [ Loader ] Reader type 2 on node COM1
[ 13:15:45 ] [ Phoenix ] Opening device COM1
[ 13:15:45 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 13:15:45 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 13:15:45 ] [ Phoenix ] Setting baud to 9600
[ 13:15:47 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 13:15:47 ] [ ATR ] Historical bytes: [C2] [14] [00] [C1] h [90] [00]
[ 13:15:47 ] [ Loader ] Init Viaccess card
[ 13:15:47 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 13:15:47 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 13:15:47 ] [ Phoenix ] Setting baud to 9600
[ 13:15:47 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 13:15:47 ] [ Phoenix ] Setting 1 Stop bit on node COM1
[ 13:15:47 ] [ Phoenix ] Setting baud to 115200
[ 13:15:47 ] [ Keyman ] Adding key
[ 13:15:47 ] [ Keyman ] Adding key
[ 13:15:47 ] [ Keyman ] Adding key
[ 13:15:47 ] [ Loader ] Card 0500 on port COM1 ready
[ 13:16:04 ] [ Newcamd ] ECM -> dummy (NOT OK)