Infinity Usb e abbo Srg

[scaistar]

il provider nn serve mascherarlo.
nel precedente LOG si vede la card viaccess riconosciuta.. quindi in qualche modo prima funzionava.
Il caid non influisce sul riconoscimento, come ti ho già scritto i parametri più importanti sono mhz e cardmhz

[krosta]

io qui non uso ne mhz=500 cardmhz = 368, prova a toglierli...

[giap2002]

Rinvio nuovamente il loader log per la svizzera. Mi dici qualcosa? avrò ripetuto decine di volte l'operazione. Grazie

> OSCam << cardserver started at Fri Dec 9 12:57:47 2011
-------------------------------------------------------------------------------
2011/12/09 12:57:47 3780 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2011/12/09 12:57:47 3780 s max. clients=509, client max. idle=120 sec
2011/12/09 12:57:47 3780 s max. logsize=1000 Kb
2011/12/09 12:57:47 3780 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/09 12:57:47 3780 s shared memory initialized (size=4302198, fd=3)
2011/12/09 12:57:47 3780 s auth size=4756
2011/12/09 12:57:47 3780 s services reloaded: 0 services freed, 1 services loaded
2011/12/09 12:57:47 3780 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/09 12:57:47 3780 s signal handling initialized (type=sysv)
2011/12/09 12:57:47 3780 s 31 service-id's loaded
2011/12/09 12:57:47 3780 s 352 provid's loaded
2011/12/09 12:57:47 3780 s Cannot open oscam.version (errno=2)
2011/12/09 12:57:47 3780 s monitor: disabled
2011/12/09 12:57:47 3780 s camd 3.3x: disabled
2011/12/09 12:57:48 3780 s camd 3.5x: initialized (fd=7, port=20000)
2011/12/09 12:57:48 3780 s cs378x: disabled
2011/12/09 12:57:48 3780 s newcamd: initialized (fd=8, port=34001, crypted)
2011/12/09 12:57:48 3780 s CAID: 183D
2011/12/09 12:57:48 3780 s provid #0: 000000
2011/12/09 12:57:48 3780 s cccam: disabled
2011/12/09 12:57:48 3780 s radegast: disabled
2011/12/09 12:57:48 3780 s logger started (pid=136)
2011/12/09 12:57:48 3780 s resolver thread started
2011/12/09 12:57:48 3780 s http started (pid=388)
2011/12/09 12:57:48 388 h HTTP Server listening on port 8189
2011/12/09 12:57:48 3780 s reader started (pid=2960, device=/dev/ttyS2, detect=cd, mhz=500, cardmhz=368)
2011/12/09 12:57:48 3780 s waiting for local card init
2011/12/09 12:57:50 2960 r02 card detected
2011/12/09 12:57:54 2960 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 12:57:57 2960 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/12/09 12:57:59 2960 r02 card system not supported
2011/12/09 12:57:59 2960 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/09 12:58:03 2960 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 12:58:03 2960 r02 Warning: D=0 is invalid, forcing D=1
2011/12/09 12:58:05 2960 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/12/09 12:58:06 2960 r02 type: Viaccess (standard atr), caid: 0500, serial: *********
2011/12/09 12:58:08 2960 r02 providers: 2 (FFF430,023800)
2011/12/09 12:58:08 2960 r02 [viaccess-reader] ready for requests
2011/12/09 12:58:08 2960 r02 [viaccess-reader] card detected
2011/12/09 12:58:08 3780 s init for all local cards done
2011/12/09 12:58:08 3780 s anti cascading disabled
2011/12/09 12:58:09 2960 r02 [viaccess-reader] serial: ********
2011/12/09 12:58:10 2960 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/09 12:58:12 2960 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/09 12:58:13 2960 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/09 12:58:13 2960 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/09 12:58:13 2960 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/09 12:58:14 2960 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/09 12:58:14 2960 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/09 12:58:14 2960 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/09 12:58:15 2960 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/09 12:58:15 2960 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/09 12:58:15 2960 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/09 12:58:16 2960 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05

[krosta]

avrai eseguito l'operazione decine di volte ma non segui i consigli....
prova a togliere mhz e cardmhz come ti ho detto sopra....
In oscam.server metti # davanti a mhz e cardmhz
#mhz=500
#cardmhz = 368
il # serve a non far leggere la riga a oscam....
In oscam.conf imposta nice=-1
Prova ad avviare oscam.exe al posto del loader
Hai una configurazione abbastanza incasinata....però la carta pare essere riconosciuta ugualmente....

[giap2002]

Ciao, ho fatto come tu hai suggerito, purtroppo senza risultati. Altri suggerimenti?

>> OSCam << cardserver started at Fri Dec 9 15:27:24 2011
-------------------------------------------------------------------------------
2011/12/09 15:27:24 2796 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2011/12/09 15:27:24 2796 s max. clients=509, client max. idle=120 sec
2011/12/09 15:27:24 2796 s max. logsize=1000 Kb
2011/12/09 15:27:24 2796 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/09 15:27:24 2796 s shared memory initialized (size=4302198, fd=3)
2011/12/09 15:27:24 2796 s auth size=4756
2011/12/09 15:27:24 2796 s services reloaded: 0 services freed, 1 services loaded
2011/12/09 15:27:24 2796 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/09 15:27:24 2796 s signal handling initialized (type=sysv)
2011/12/09 15:27:24 2796 s 31 service-id's loaded
2011/12/09 15:27:24 2796 s 352 provid's loaded
2011/12/09 15:27:24 2796 s Cannot open oscam.version (errno=2)
2011/12/09 15:27:24 2796 s monitor: disabled
2011/12/09 15:27:24 2796 s camd 3.3x: disabled
2011/12/09 15:27:24 2796 s camd 3.5x: initialized (fd=7, port=20000)
2011/12/09 15:27:24 2796 s cs378x: disabled
2011/12/09 15:27:24 2796 s newcamd: initialized (fd=8, port=34001, crypted)
2011/12/09 15:27:24 2796 s CAID: 183D
2011/12/09 15:27:24 2796 s provid #0: 000000
2011/12/09 15:27:24 2796 s cccam: disabled
2011/12/09 15:27:24 2796 s radegast: disabled
2011/12/09 15:27:24 2796 s logger started (pid=2620)
2011/12/09 15:27:24 2796 s resolver thread started
2011/12/09 15:27:24 2796 s http started (pid=3276)
2011/12/09 15:27:24 3276 h HTTP Server listening on port 8189
2011/12/09 15:27:24 2796 s reader started (pid=2088, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/09 15:27:24 2796 s waiting for local card init
2011/12/09 15:27:27 2088 r02 card detected
2011/12/09 15:27:30 2088 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 15:27:33 2088 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 15:27:35 2088 r02 card system not supported
2011/12/09 15:27:35 2088 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/09 15:27:40 2088 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 15:27:40 2088 r02 Warning: D=0 is invalid, forcing D=1
2011/12/09 15:27:41 2088 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 15:27:42 2088 r02 type: Viaccess (standard atr), caid: 0500, serial: ********
2011/12/09 15:27:44 2088 r02 providers: 2 (FFF430,023800)
2011/12/09 15:27:44 2088 r02 [viaccess-reader] ready for requests
2011/12/09 15:27:44 2088 r02 [viaccess-reader] card detected
2011/12/09 15:27:45 2796 s init for all local cards done
2011/12/09 15:27:45 2796 s anti cascading disabled
2011/12/09 15:27:45 2088 r02 [viaccess-reader] serial: *******
2011/12/09 15:27:46 2088 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/09 15:27:48 2088 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/09 15:27:49 2088 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/09 15:27:49 2088 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/09 15:27:49 2088 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/09 15:27:50 2088 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/09 15:27:50 2088 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/09 15:27:50 2088 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/09 15:27:51 2088 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/09 15:27:51 2088 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/09 15:27:51 2088 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/09 15:27:52 2088 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05
-------------------------------------------------------------------------------
>> OSCam << disconnected
-------------------------------------------------------------------------------

[krosta]

2011/12/09 15:27:24 2796 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
il nice lo vedo ancora a -20
prova ad aggiornare oscam e le dll
http://tekreaders.com/blog/oscam/oscam-windows/
http://tekreaders.com/blog/wp-content/p ... d.php?id=8

[giap2002]

Ho notato che pur mettendo a Nice -1 e salvandolo, se lo vado subito dopo averlo lanciato ritorna -20

[krosta]

perchè lanci il loader e non oscam.exe come ti avevo detto sopra!!

[giap2002]

Ho fatto esattamente come mi hai suggerito. Non capisco perché mettendo su nice -1, dopo averlo lanciato ritorni -20. Ho aggiornato Oscam, senza alcun risultato. Questo l'ultimo oscam log:

>> OSCam << cardserver started at Fri Dec 9 16:14:19 2011
-------------------------------------------------------------------------------
2011/12/09 16:14:19 0 s log_list_thread thread started
2011/12/09 16:14:19 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6073 (i386-pc-cygwin)
2011/12/09 16:14:19 0 s version=1.20-unstable_svn, build #6073, system=i386-pc-cygwin, nice=-20
2011/12/09 16:14:19 0 s client max. idle=120 sec, debug level=0
2011/12/09 16:14:19 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2011/12/09 16:14:19 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/09 16:14:19 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/12/09 16:14:19 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/09 16:14:19 0 s signal handling initialized (type=sysv)
2011/12/09 16:14:19 0 s 31 service-id's loaded in 0ms
2011/12/09 16:14:19 0 s 38 tier-id's loaded
2011/12/09 16:14:19 0 s 352 provid's loaded
2011/12/09 16:14:19 0 s can't open file "./oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/12/09 16:14:19 0 s Starting listener 0
2011/12/09 16:14:19 0 s monitor: disabled
2011/12/09 16:14:19 0 s Starting listener 0
2011/12/09 16:14:19 0 s camd35: initialized (fd=4, port=20000)
2011/12/09 16:14:19 0 s Starting listener 0
2011/12/09 16:14:19 0 s cs378x: disabled
2011/12/09 16:14:19 0 s Starting listener 0
2011/12/09 16:14:19 0 s newcamd: initialized (fd=5, port=34001, crypted)
2011/12/09 16:14:19 0 s -> CAID: 183D PROVID: 000000
2011/12/09 16:14:19 0 s Starting listener 0
2011/12/09 16:14:19 0 s radegast: disabled
2011/12/09 16:14:19 0 s http thread started
2011/12/09 16:14:19 0 s reader check thread started
2011/12/09 16:14:19 0 s check thread started
2011/12/09 16:14:19 0 s creating thread for device /dev/ttyS2
2011/12/09 16:14:19 0 s creating thread for device /dev/ttyS2
2011/12/09 16:14:19 80EFE8 h HTTP Server listening on port 8189
2011/12/09 16:14:19 81A2B8 r ERROR opening device /dev/ttyS2
2011/12/09 16:14:19 81A2B8 r Cannot open device: /dev/ttyS2
2011/12/09 16:14:19 0 s loadbalancer: can't read from file /cygdrive/c/DOCUME~1/giap/IMPOST~1/Temp/_oscam/stat
2011/12/09 16:14:19 0 s waiting for local card init
2011/12/09 16:14:22 810A88 r reader infinity initialized (device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/09 16:14:22 0 infinity card detected
2011/12/09 16:14:26 810A88 r ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 16:14:29 810A88 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 16:14:32 810A88 r card system not supported
2011/12/09 16:14:32 810A88 r Normal mode failed, reverting to Deprecated Mode
2011/12/09 16:14:36 810A88 r ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 16:14:36 810A88 r Warning: D=0 is invalid, forcing D=1
2011/12/09 16:14:38 810A88 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 16:14:39 810A88 r [viaccess-reader] using ecm #505 for long viaccess ecm
2011/12/09 16:14:40 810A88 r type: Viaccess (standard atr), caid: 0500, serial: *******
2011/12/09 16:14:42 810A88 r providers: 2 (FFF430,023800)
2011/12/09 16:14:42 810A88 r [viaccess-reader] ready for requests
2011/12/09 16:14:42 810A88 r found cardsystem viaccess
2011/12/09 16:14:42 810A88 r [viaccess-reader] card detected
2011/12/09 16:14:42 810A88 r [viaccess-reader] serial: *******
2011/12/09 16:14:44 810A88 r provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/09 16:14:46 810A88 r provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/09 16:14:47 810A88 r class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/09 16:14:47 810A88 r class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/09 16:14:47 810A88 r class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/09 16:14:48 810A88 r class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/09 16:14:48 810A88 r class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/09 16:14:48 810A88 r class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/09 16:14:49 810A88 r class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/09 16:14:49 810A88 r class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/09 16:14:49 810A88 r class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/09 16:14:50 810A88 r class: 01, expiry date: 2010/10/21 - 2010/12/05
2011/12/09 16:15:19 81A2B8 r ERROR opening device /dev/ttyS2
2011/12/09 16:15:19 81A2B8 r Cannot open device: /dev/ttyS2

[giap2002]

Lanciando oscam.exe, viene fuori una finestra che dice:

Warnig: keyword "tiger_rsakey" in reader section not recognized

[krosta]

impossibile che avviando oscam.exe ti cambi da solo il parametro nice!!! mai visto!!
secondo me il problema è che hai la configurazione mista tivusat/srg
prova così:

oscam.server
[reader]
label=srg
protocol=mouse
detect=cd
device=/dev/ttyS2
group=1
caid=0500
emmcache=1,1,2

[reader]
label=tivu
protocol=mouse
detect=cd
device=/dev/ttyS2
group=1
caid=183D
emmcache=1,1,2
rsakey=A92....

oscam.user
[account]
user=user
pwd=pass
group=1
au=srg,tivu
caid=0500,183D
ident=0500:023800;183D:005411
keepalive=1

oscam.conf
[global]
logfile=oscam.log
nice=-1
maxlogsize=1000
preferlocalcards=1
saveinithistory=1

[newcamd]
port = 34000@0500:023800;34001@183D:005411
key = 0102030405060708091011121314

acamd cardclient.conf
newcamd:127.0.0.1:34000:1/0500/FFFF:user:pass:0102030405060708091011121314:023800,FFF430
newcamd:127.0.0.1:34001:1/183D/FFFF:user:pass:0102030405060708091011121314

[krosta]

dimenticavo...
come suggerito da scaistar in precedenza in oscam.server sotto reader aggiungi ai 2 reader enable=1 e enable=0 a seconda di quale vuoi utilizzare

[reader]
label=srg
protocol=mouse
detect=cd
device=/dev/ttyS2
group=1
caid=0500
emmcache=1,1,2
enable=1

[reader]
label=tivu
protocol=mouse
detect=cd
device=/dev/ttyS2
group=1
caid=183D
emmcache=1,1,2
rsakey=A92....
enable=0

così usi srg...

[giap2002]

Con la configurazione che tu mi hai proposto non vedo nemmeno tivusat, pur aggiungendo gli ultimi 2 enable.
La cosa che non comprendo è il perché il Nice -1 una volta lanciato il loader si trasformi in -20.
Questo l'esito:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Dec 9 16:51:04 2011
-------------------------------------------------------------------------------
2011/12/09 16:51:04 1028 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2011/12/09 16:51:04 1028 s max. clients=509, client max. idle=120 sec
2011/12/09 16:51:04 1028 s max. logsize=1000 Kb
2011/12/09 16:51:04 1028 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/09 16:51:04 1028 s shared memory initialized (size=4302198, fd=3)
2011/12/09 16:51:04 1028 s auth size=4756
2011/12/09 16:51:04 1028 s services reloaded: 0 services freed, 1 services loaded
2011/12/09 16:51:04 1028 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/09 16:51:04 1028 s signal handling initialized (type=sysv)
2011/12/09 16:51:04 1028 s 31 service-id's loaded
2011/12/09 16:51:04 1028 s 352 provid's loaded
2011/12/09 16:51:04 1028 s Cannot open oscam.version (errno=2)
2011/12/09 16:51:04 1028 s monitor: disabled
2011/12/09 16:51:04 1028 s camd 3.3x: disabled
2011/12/09 16:51:04 1028 s camd 3.5x: disabled
2011/12/09 16:51:04 1028 s cs378x: disabled
2011/12/09 16:51:04 1028 s newcamd: initialized (fd=7, port=34000, crypted)
2011/12/09 16:51:04 1028 s CAID: 0500
2011/12/09 16:51:04 1028 s provid #0: 000000
2011/12/09 16:51:04 1028 s cccam: disabled
2011/12/09 16:51:04 1028 s radegast: disabled
2011/12/09 16:51:04 1028 s logger started (pid=3128)
2011/12/09 16:51:04 1028 s resolver thread started
2011/12/09 16:51:04 1028 s http started (pid=3156)
2011/12/09 16:51:04 1028 s reader started (pid=4272, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/09 16:51:04 3156 h HTTP Server listening on port 0
2011/12/09 16:51:04 1028 s reader started (pid=3044, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/09 16:51:04 1028 s waiting for local card init
2011/12/09 16:51:04 3044 r03 ERROR opening device /dev/ttyS2
2011/12/09 16:51:04 3044 r03 Cannot open device: /dev/ttyS2
2011/12/09 16:51:07 4272 r02 card detected
2011/12/09 16:51:11 4272 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 16:51:13 4272 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 16:51:16 4272 r02 card system not supported
2011/12/09 16:51:16 4272 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/09 16:51:20 4272 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 16:51:20 4272 r02 Warning: D=0 is invalid, forcing D=1
2011/12/09 16:51:21 4272 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 16:51:23 4272 r02 type: Viaccess (standard atr), caid: 0500, serial: ********
2011/12/09 16:51:24 4272 r02 providers: 2 (FFF430,023800)
2011/12/09 16:51:24 4272 r02 [viaccess-reader] ready for requests
2011/12/09 16:51:24 4272 r02 [viaccess-reader] card detected
2011/12/09 16:51:25 4272 r02 [viaccess-reader] serial: *********
2011/12/09 16:51:25 1028 s init for all local cards done
2011/12/09 16:51:25 1028 s anti cascading disabled
2011/12/09 16:51:27 4272 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/09 16:51:29 4272 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/09 16:51:29 4272 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/09 16:51:29 4272 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/09 16:51:30 4272 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/09 16:51:30 4272 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/09 16:51:30 4272 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/09 16:51:31 4272 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/09 16:51:31 4272 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/09 16:51:31 4272 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/09 16:51:32 4272 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/09 16:51:32 4272 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05
2011/12/09 16:52:04 3044 r03 ERROR opening device /dev/ttyS2
2011/12/09 16:52:04 3044 r03 Cannot open device: /dev/ttyS2
-------------------------------------------------------------------------------
>> OSCam << disconnected
-------------------------------------------------------------------------------

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Dec 9 17:00:12 2011
-------------------------------------------------------------------------------
2011/12/09 17:00:12 4440 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2011/12/09 17:00:12 4440 s max. clients=509, client max. idle=120 sec
2011/12/09 17:00:12 4440 s max. logsize=1000 Kb
2011/12/09 17:00:12 4440 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/09 17:00:12 4440 s shared memory initialized (size=4302198, fd=3)
2011/12/09 17:00:12 4440 s auth size=4756
2011/12/09 17:00:12 4440 s services reloaded: 0 services freed, 1 services loaded
2011/12/09 17:00:12 4440 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/12/09 17:00:12 4440 s signal handling initialized (type=sysv)
2011/12/09 17:00:12 4440 s 31 service-id's loaded
2011/12/09 17:00:12 4440 s 352 provid's loaded
2011/12/09 17:00:12 4440 s Cannot open oscam.version (errno=2)
2011/12/09 17:00:12 4440 s monitor: disabled
2011/12/09 17:00:12 4440 s camd 3.3x: disabled
2011/12/09 17:00:12 4440 s camd 3.5x: disabled
2011/12/09 17:00:12 4440 s cs378x: disabled
2011/12/09 17:00:13 4440 s newcamd: initialized (fd=7, port=34000, crypted)
2011/12/09 17:00:13 4440 s CAID: 0500
2011/12/09 17:00:13 4440 s provid #0: 000000
2011/12/09 17:00:13 4440 s cccam: disabled
2011/12/09 17:00:13 4440 s radegast: disabled
2011/12/09 17:00:13 4440 s logger started (pid=4580)
2011/12/09 17:00:13 4440 s resolver thread started
2011/12/09 17:00:13 4440 s http started (pid=4520)
2011/12/09 17:00:13 4520 h HTTP Server listening on port 0
2011/12/09 17:00:13 4440 s reader started (pid=4480, device=/dev/ttyS2, detect=cd, mhz=357, cardmhz=357)
2011/12/09 17:00:13 4440 s waiting for local card init
2011/12/09 17:00:16 4480 r02 card detected
2011/12/09 17:00:19 4480 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 17:00:22 4480 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 17:00:24 4480 r02 card system not supported
2011/12/09 17:00:24 4480 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/09 17:00:29 4480 r02 ATR: 3F 77 18 00 00 C2 47 40 00 68 90 00
2011/12/09 17:00:29 4480 r02 Warning: D=0 is invalid, forcing D=1
2011/12/09 17:00:30 4480 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 17:00:31 4480 r02 type: Viaccess (standard atr), caid: 0500, serial: *******
2011/12/09 17:00:33 4480 r02 providers: 2 (FFF430,023800)
2011/12/09 17:00:33 4480 r02 [viaccess-reader] ready for requests
2011/12/09 17:00:33 4480 r02 [viaccess-reader] card detected
2011/12/09 17:00:34 4480 r02 [viaccess-reader] serial: ********
2011/12/09 17:00:34 4440 s init for all local cards done
2011/12/09 17:00:34 4440 s anti cascading disabled
2011/12/09 17:00:35 4480 r02 provider: 1, id: FFF430, name: ISSUER, sa: C29B4910, geo: empty
2011/12/09 17:00:37 4480 r02 provider: 2, id: 023800, name: SRGSSR, sa: C29B4910, geo: FF FF FF FF
2011/12/09 17:00:38 4480 r02 class: 01, expiry date: 2011/11/10 - 2011/12/25
2011/12/09 17:00:38 4480 r02 class: 01, expiry date: 2011/10/06 - 2011/11/20
2011/12/09 17:00:38 4480 r02 class: 01, expiry date: 2011/09/01 - 2011/10/16
2011/12/09 17:00:39 4480 r02 class: 01, expiry date: 2011/06/23 - 2011/08/07
2011/12/09 17:00:39 4480 r02 class: 01, expiry date: 2011/04/14 - 2011/05/29
2011/12/09 17:00:39 4480 r02 class: 01, expiry date: 2011/03/10 - 2011/04/24
2011/12/09 17:00:40 4480 r02 class: 01, expiry date: 2011/02/03 - 2011/03/20
2011/12/09 17:00:40 4480 r02 class: 01, expiry date: 2010/12/30 - 2011/02/13
2011/12/09 17:00:40 4480 r02 class: 01, expiry date: 2010/11/25 - 2011/01/09
2011/12/09 17:00:41 4480 r02 class: 01, expiry date: 2010/10/21 - 2010/12/05
2011/12/09 17:01:58 4480 r02 card ejected slot = 0
2011/12/09 17:02:05 4480 r02 card detected
2011/12/09 17:02:09 4480 r02 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/09 17:02:11 4480 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 17:02:12 4480 r02 detect nagra tiger card
2011/12/09 17:02:16 4480 r02 card system not supported
2011/12/09 17:02:16 4480 r02 Normal mode failed, reverting to Deprecated Mode
2011/12/09 17:02:20 4480 r02 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2011/12/09 17:02:21 4480 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/09 17:02:22 4480 r02 detect nagra tiger card
2011/12/09 17:02:30 4480 r02 card system not supported
2011/12/09 17:02:30 4480 r02 card initializing error

[krosta]

caro giap2002 o leggi con attenzione i consigli che ti vengono dati oppure io mi ritiro....continui a lanciare oscam con il loader!!!!
rileggi il post sopra sull'enable=0 enable=1

dal primo log: ERROR opening device /dev/ttyS2
dal secondo log: reader started (pid=4480, device=/dev/ttyS2
poi card ejected slot = 0

mi chiedo com'è possibile che una volta non trova il reader e poi lo trova...misteri...
lasica inserita sta srg e concentrati su quella...

[giap2002]

Scusami, lo so, sono un neofita, e come tale occorre pazienza. Se lo ritieni opportuno posso scrivere in pm. Comunque sia, dopo aver configurato con le varie scritte - user, config, etc)- ho provato più volte a lanciare oscam.exe, ma a differenza di oscam loader che apre una finestra in basso a destra con le diverse righe scritte, oscam exe apre solo una finestra priva di contenuti senza alcuna scritta. Non so proprio cosa fare.