Sembrerebbe che Technisat abbia volutamente disabilitato i comandi DiseqC 1.2 . Incredibilmente nella scheda tecnica del sito technisat.de non si accenna a nulla di tutto ciò.
The SkyStar S2 doesn't support DiSEqC 1.2. The hardware could send such DiSEqC commands, but they are disabled by software. TechniSat wants it this way, because the power supply may be insufficient for a motor. The card and your mainboard may get damaged in this case. The source of the problem is a missing dynamic current limiting, making it risky to use this card with a motor. TechniSat has added the current limiting in the SkyStar USB HD (a kind of USB SkyStar S2), which is able to supply a motor with a maximum of 450 mA. If the motor needs more, the device will switch the power supply off.
Ho letto di un utente che ha usato gli stessi driver modificati per Skystar 2 (si.. la vecchia gloriosa Skystar2) dove appunto questo blocco era stato rimosso da qualche buon uomo. il famoso Sky2PCAVSrc.ax
un altro utente scrive
In a test I was conducting 2 months ago, the Skystar S2 was indeed moving just fine my SG2100 motor with the SS2DiSeqC plugin, version 1.10 (stand alone, never tried it as a DVBViewer plugin). You also need an old version of SS2DiSEqC.dll (I believe from Skystar 2's 4.3 driver package) in SS2DiSeqC's folder.
quindi in qualche modo.. si può
Inviato: dom lug 07, 2013 9:36 pm